S&S Cycle

V-Twin - 37-8951 - Cylinder StudsDescriptionEvolution cylinder studs only are 6.680" long and have a 3/8-16 coarse thread. Fits:FXST 1986-1998FLT 1986-1998FXD 1991-1998FXR 1986-1994FLST...

V-Twin - 35-9368 - S&S Super E Carburetor Kit 1-7/8 inch Description S&S 1-7/8" Super E carburetor kit for street stock applications.S&S 1-7/8" Super "E" carburetor kit features...

V-Twin - 35-8021 - S&S Intake ManifoldDescriptionS&S intake manifold for Evolution models converts stock rubber compliance fittings to a more rigid mount system.The outer diameter of this manifold...

V-Twin - 35-0548 - Retrofit Fuel Line Kit Black for S&S inchE inch and OKO CarDescriptionRetrofit fuel line kit includes a pre-formed 17" x 5/16" black fuel line, needle and seat inlet assembly with...

V-Twin - 35-0258 - Carburetor Insulator BlockDescriptionCarburetor insulator block with 1/4" male thread for 2-1/16" carburetor. Fits:Replacement application for 2-1/16" male thread carburetors...

V-Twin - 35-0109 - Intake ManifoldDescriptionIntake manifold is O-ring type and is a replacement for all OKO and S&S B & E 1-7/8" Super carburetors or can be used as a stock replacement. For models...

V-Twin - 35-0106 - O-Ring Type Intake ManifoldDescriptionS&S intake manifold for 1955-1965 FL models with stock 5.330 " cylinders. Fits:Custom application for S&S carburetorAdditional Information ...

V-Twin - 35-0102 - S&S inchE inch Intake ManifoldDescriptionIntake manifold is flat seal type. It is a replacement for all S&S B, E and OKO 1-7/8" super carburetors or can be used as a stock...

V-Twin - 35-0101 - S&S Intake ManifoldDescriptionS&S intake manifold is O-ring type. It is a replacement for all S&S B & E 1-7/8" Super carburetors or can be used as a stock replacement. Fits:FX...

V-Twin - 34-1748 - EFI Delphi Backing PlateDescriptionEFI with Delphi backing plate features a black finish. Fits:FLT 2008-2016Additional Information UOM1 - EA ManufacturerS&S Cycle OriginUSA

V-Twin - 34-1098 - S&S Air Cleaner Backing PlateDescriptionS&S air cleaner backing plate is for S&S air cleaners on super E and G carburetors.For models fitted with S&S or OKO 47mm carburetors...

V-Twin - 34-1097 - S&S Air Cleaner Backing PlateDescriptionS&S air cleaner backing plate is for super E and G air cleaners.For models fitted with S&S or OKO 47mm carburetors. Fits:FLST 1993-2007XL...

V-Twin - 34-1015 - S&S Air Cleaner Assembly ChromeDescriptionS&S Super E and G replacement chrome air cleaner assembly includes backing plate which has built in brackets to mount to Evolution heads...

V-Twin - 34-0981 - S&S Air Cleaner CoverDescriptionS&S chrome air cleaner cover is for a Super E carburetor.*NOTE: Fits original S&S air cleaner backing plates only. Fits:Replacement application for...

V-Twin - 34-0337 - Air Cleaner Support Bracket ChromeDescriptionAir cleaner support bracket is for S&S E and G carburetors features a chrome finish. Fits:Replacement application for S&S "E"...

V-Twin - 32-7806 - S&S Ignition Module Installation KitDescriptionS&S ignition module installation kit for carbureted models without spark technology ignition system. Fits:XL 2004-UPAdditional...

V-Twin - 32-1732 - Crane HI-4N Ignition Module KitDescriptionCrane ignition kit includes ignition, single fire coil, and 8.5mm double silicone spark plug wires.The HI-4N ignition has a one piece...

V-Twin - 32-1731 - S&S HI-4N Ignition Single or Dual FireDescriptionS&S ignition's one piece machined aluminum housing reduces the vibration and improves dissipation and reliability.Ignition is...

V-Twin - 12-9943 - Pinion Shaft Drive GearDescriptionWhite pinion shaft drive gear, size 1.4751-1.4745 Fits:FXST 1984-1989FX 1977-1984FXR 1982-1989FLST 1986-1989FL 1977-1984FLT 1979-1989Additional...

V-Twin - 12-9942 - Pinion Shaft Drive Gear GreenDescriptionPinion shaft gear is green size, fits Big Twin models. Green gear size is 1.4721- 1.4715". Fits:FXST 1984-1989FX 1977-1984FXR 1982-1989FLST...

V-Twin - 12-9938 - Pinion Shaft Drive Gear OrangeDescriptionPinion shaft gear is orange size, the largest size gear. Orange gear size is 1.4756- 1.4751". Fits:FXST 1984-1989FX 1977-1984FXR...

V-Twin - 12-5240 - S&S Cam Installation Support Kit TC-88DescriptionS&S cam installation support kit for TC-88 models includes cam cover gasket, two inner cam needle bearings, two outer cam bearings...

V-Twin - 12-2556 - Connecting Rod Bearing SetDescriptionS&S connecting rod bearing set with 3 steel cages fitted with standard size Torrington rollers for connecting rods. Fits:UL 1937-1948FXR...

V-Twin - 12-2070 - Crankcase Breather ValveDescriptionCrankcase breather valve features 4 steel reed valves that will allow air and oil mist to escape from the engine crankcase.Breather fits TC-88A...

V-Twin - 12-1949 - Reed Breather Valve Stock AssemblyDescriptionS&S reed breather valve assembly with 3 steel reeds for Evolution models.S&S reed breather valve assembly features 3 steel reeds that...

V-Twin - 12-1389 - Cam Chest Drive Gear For High Lift CamDescriptionS&S cam chest distributor drive gear features narrow tooth width for a large cam. Drive gear is for high lift cams.*NOTE: Bushings...

V-Twin - 12-1388 - Cam Chest Idler GearDescriptionCam chest idler gear.Order shim separately to fit. ...

V-Twin - 12-0126 - Cam Installation Support Kit Chain TypeDescriptionChain type kit includes cam cover gasket, two inner cam bearings, two outer cam bearings and a retaining ring. Fits:FLT...

V-Twin - 12-0125 - Cam Installation Support Kit Gear TypeDescriptionGear type kit includes cam cover gasket, two inner cam bearings, two outer cam bearings and a retaining ring. Fits:FLT 2000-2006FXD...

V-Twin - 11-1401 - 4-1/8 inch Piston Ring Set .010 OversizeDescriptionS&S replacement piston ring set is for a 4-1/8" bore and is .010 oversize. Sold in sets for 2 pistons Fits:Replacement for S&S...

V-Twin - 11-0461 - 74 inch Overhead Valve Forged Piston Set .060 OversizeDescriptionS&S forged .060 piston set for stroker flywheels.S&S stroker forged .060 piston set is machined to fit both 4-3/4"...

V-Twin - 11-0455 - 74 inch Overhead Valve Forged Piston Set Standard SizeDescriptionS&S forged piston set 3-7/16" bore is standard size. Set includes rings, wrist pins and retainers. Machined to fit...

V-Twin - 11-0063 - 80 inch Shovelhead S&S Cylinder SetDescriptionS&S cast iron cylinders for Shovelhead models are stock length and include base nuts, head bolts, and head and base gaskets.Cylinders...

V-Twin - 10-3514 - S&S Twin Cam Flywheel Assembly 4-3/8 inch StrokeDescriptionS&S Twin Cam with 4-3/8" stroke flywheel assembly is for 96", 103", 106", 110" and 117" engines and does not include the...

V-Twin - 10-1872 - Brass Pinion Shaft PlugDescriptionPinion shaft plug features a brass construction with a .0935" hole, .252" x .160". Fits:FXST 1984-1998FLT 1984-1998FXD 1991-1998FXR 1984-1994FLST...

V-Twin - 10-1871 - Brass Pinion Shaft PlugDescriptionPinion shaft plug features a brass construction with a .0625" hole, .252" x .160". Fits:FXST 1984-1998FLT 1984-1998FXD 1991-1998FXR 1984-1994FLST...

V-Twin - 10-0847 - S&S Twin Cam Flywheel Assembly 4-3/8 inch StrokeDescriptionS&S Twin Cam 4-3/8" stroke flywheel assembly is for 96", 103", 106", 110" and 117" engines and includes the sprocket...

V-Twin - 10-0846 - S&S Twin Cam Flywheel Assembly 4-3/8 inch StrokeDescriptionS&S Twin Cam with 4-3/8" stroke flywheel assembly is for 96", 103", 106", 110" and 117" non balancer type engines and...

V-Twin - 10-0845 - S&S Twin Cam Flywheel Assembly 4-3/8 inch StrokeDescriptionS&S Twin Cam 4-3/8" stroke flywheel assembly is for 96", 103", 106", 110" and 117" engines and includes the sprocket...

V-Twin - 10-0576 - S&S Engine Crankcase SetDescriptionCrankcase set for 2000-2006 TC-88A engine with stock bore engine with stock bore and comes ready to assemble.S&S crankcase set includes Timken...