Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...

Jims - 95960-52C Clutch Hub Puller fits '36-'90 Big Twin Models Features: Used to remove wet and dry clutch hubs without removing clutch release rod 4 bolts included for dry clutch removal Made in the U.S.A...

Jims - 1051 Wrist Pin Bushing Tool fits '99-'06 Twin Cam Models Features: Used to remove and install wrist pin bushings without removing connecting rods from crankcases Comes with instructions Made in the U.S.A...

Jims - 1283 Camshaft Chain Tensioner Tool fits '99-'06 Twin Cam Models (Except '06 Dyna) Features: Designed to unload the pressure on the primary and secondary chain tensioners to assemble and disassemble cams Also checks spring loads on chain...

LA Choppers - Pinned Hefty Top Clamp fits '99-'23 Big Twin Models w/ 3-1/2 ” on Center Risers & Offset Mounting Holes Features: Fits Hefty handlebars and risers Polished aluminum construction Pinned to prevent movement of handlebars Made...

Custom Cycle Engineering - 49 mm Chrome Fork Brace fits '06-'17 FXD Model Features: Original Randy Smith design Manufactured from a solid piece of 6061 T-6 aluminum, then chrome-plated Designed with a compound arch for greater torsional stiffness,...

Custom Cycle Engineering - 49 mm Chrome Fork Brace fits '06-'08 FXDWG, '08-'17 FXDF Models Features: Original Randy Smith design Manufactured from a solid piece of 6061 T-6 aluminum, then chrome-plated Designed with a compound arch for greater...

Custom Cycle Engineering - Steering Damper System fits '99-'07 FLHR/​FLHT/​FLHTCU/​FLHX Models Features: This complete steering damper system stabilizes the front fork and helps prevent front-end wobble Custom-designed 1-1/4" clamp and bracket...

Custom Cycle Engineering - Swingarm Retrofit Kit fits '99-'01 FLT/​FLHT/​FLHR Models Features: Retrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring models No need to alter transmission housing Will require the purchase of a...

Custom Cycle Engineering - Swingarm Retrofit Kit w/ Pivot Shaft fits '99-'01 FLT/​FLHT/​FLHR Models Features: Retrofits the improved swingarm from 02-08 Touring models to a 84-01 Touring models No need to alter transmission housing Will require the...

Custom Cycle Engineering - 41 mm Wide Glide Tweek Bar - Chrome Features: Original Randy Smith design As in the good old days with extended front tubes, the need for a tweek bar is here again Vast improvement over the tweek bars used in the 60s and...

Custom Cycle Engineering - Adjustable Engine Mount fits '99-'17 Dyna Models (OEM #47226-93, 47226-99, 47226-90A) Features: Replace stock front engine bracket with custom slotted bracket with alignment lines Allows the rider to dial in the engine to...

Custom Cycle Engineering - Top Stabilizer Link fits '99-'03 Dyna Models Features: Reduces engine vibration and aligns power train Adjustable rubber-isolated design Greatly reduces vibration especially at high speeds Replaces stock link which is...

Custom Cycle Engineering - Engine Equator II fits '09-'16 Touring Models Features: Allows all Dresser riders to correct chassis misalignment, which is impossible to achieve with the stock motor mount Billet aluminum bracket replaces the forged front...

Custom Cycle Engineering - Narrow-To-Wide Glide Wheel Conversion Kit fits '00-'03 Narrow Glide Model Features: Original Randy Smith design Allow the use of narrow glide 19" or 21" wheel (found on FX, FXR, FXD and XL models) to be installed in a 41...

Arlen Ness - Stage 1 Big Sucker Air Cleaner Kit fits '93-'99 Evolution Big Twin Models Features: Kits include backing plate, filter, breather bolts, steel cover and necessary hardware Billet aluminum or steel outer cover, available in black or...

 Burly Brand - 14" Narrow Bottom Ape Hangers for 1" Handlebars The Narrow Bottom handlebars are Burly Brand's twist on the classic ape hanger. Pre-drilled and slotted making internal wiring a breeze, you can choose from black or chrome for a finish...

Drag Specialties - 1" TBW Ape Hanger Handlebars for Narrow Glide These handlebars are made from steel tubing and come in three different finishes: chrome, gloss black, or flat black. They are slotted and notched for Throttle-By-Wire applications and are...

Drag Specialties - 1" TBW Ape Hanger Handlebars for Narrow Glide - 18''/ Chrome These handlebars are made from steel tubing and come in three different finishes: chrome, gloss black, or flat black. They are slotted and notched for Throttle-By-Wire...

Drag Specialties - 1" TBW Ape Hanger Handlebars for Narrow Glide - 12''/ Gloss Black These handlebars are made from steel tubing and come in three different finishes: chrome, gloss black, or flat black. They are slotted and notched for Throttle-By-Wire...

Drag Specialties - 1" TBW Ape Hanger Handlebars for Narrow Glide - 10''/ Chrome These handlebars are made from steel tubing and come in three different finishes: chrome, gloss black, or flat black. They are slotted and notched for Throttle-By-Wire...

Biltwell - Tracker Mid Smooth Handlebars 1" Black Biltwell has done it again- these low profile Tracker Handlebars look great on just about any motorcycle! Choose from chrome or black. These are even lower than most stock bars, so you don't need to...

Biltwell - Tyson XL Pullback 14" Handlebars- Chrome/ Slotted These T-style handlebars are a clean look on FXR's, Dynas, Sportsters, and Choppers. Features Manufactured from 1" OD x .120" wall seamless 4130 chromoly tubing All bends are created with...

Legend Suspension - AXEO Front Suspension System fits Harley Touring Models- 49 mm - FLH '17+ This front suspension cartridge kit is available in two different spring rates, Performance or Comfort. The Performance kit is designed with a stiffer spring...

Uni Filter - Air Filter Element fits '86-'89 80” Evolution Big Twin Models (OEM #29259-86) Features: Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still providing superior filtration Made in the...

Uni Filter - Air Filter Element fits '84-'85 80” Evolution Big Twin Models (Except FLT, FLHT (OEM #29259-83A)) Features: Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still providing superior...

Uni Filter - Air Filter Element fits '84-'85 FLT/FLHT Models (OEM #29288-83) Features: Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still providing superior filtration Made in the...

Uni Filter - Air Filter fits '80-'82 FLT, '82-'83 FXR, 'L78-'82 Sportster 1000, 'L78-'84 FX, FL & FLH Models (OEM #29255-78) Features: Constructed of a unique, open-cell polyurethane material that allows maximum airflow while still providing...

Drag Specialties - 3-1/4" Chrome Magnetic Ring Oil Filter With Nut fits '86-'22 Sportster (Except RH Sportster), 09-12 XR1200/X Models (OEM #63806-83, 63796-77A) Features: High-quality chrome spin-on-style oil filters Magnetic filters are designed...

Drag Specialties - 2-1/4" Chrome Magnetic Ring Oil Filter With Nut fits 'L82-'86 FX/FL, '80-'E85 Sportster Models (OEM #63782-80A, 63810-80) Features: High-quality chrome spin-on-style oil filters Magnetic filters are designed with a magnetic ring...

Drag Specialties - 5-1/2" Chrome Magnetic Ring Oil Filter With Nut fits '91-'98 FXD Model (OEM #63813-90) Features: High-quality chrome spin-on-style oil filters Magnetic filters are designed with a magnetic ring in center to capture small particles...

Drag Specialties - 3-1/4" Chrome Magnetic Ring Oil Filter With Nut fits '17-'24 M-Eight, '99-'17 Twin Cam Models (OEM #63798-99, 63731-99A) Features: High-quality chrome spin-on-style oil filters Magnetic filters are designed with a magnetic ring in...

Drag Specialties - Oil Filter with Nut fits '17-'24 M-Eight (Standard Capacity), '99-'17 Twin Cam Models (OEM #63731-99A, 63798-99) Features: High-quality spin-on filters are a dependable replacement for most Harley-Davidson models Includes a 17 mm...

Drag Specialties - Oil Filter with Nut fits '91-'98 Dyna Glide Models (OEM #63813-90) Features: High-quality spin-on filters are a dependable replacement for most Harley-Davidson models Includes a 17 mm hex nut on the end of the filter for easy...

Drag Specialties - Oil Filter fits '17-'24 M-Eight Model (High Capacity) (OEM #627002-96, 627002-97) Features: High-quality spin-on filters are a dependable replacement Fitment 2024 Harley-Davidson Road King Police...

Drag Specialties - Oil Filter with Nut fits '17-'24 M-Eight Model (High Capacity) (OEM #627002-96, 627002-97) Features: High-quality spin-on filters are a dependable replacement Note: Features a 17 mm hex nut on the end of the filter for easy...

Drag Specialties - Oil Filter Wrench fits '01-'21 Big Twin Models Features: 14-flute cutout design to clear crank sensor Fits Drag Specialties and most other oil filters with 14 flutes Fitment 2018 Harley-Davidson Softail Breakout...

Drag Specialties - Oil Filter fits '17-'24 M-Eight (Standard Capacity), '99-'17 Twin Cam Models (OEM #63731-99A, 63798-99) Features: High-quality spin-on filters are a dependable replacement Fitment 2024 Harley-Davidson Road King Police...

Drag Specialties - Oil Filter fits '91-'98 Dyna Glide Models (OEM #63813-90) Features: High-quality spin-on filters are a dependable replacement Fitment 1995-1998 Harley-Davidson Super Glide...

Drag Specialties - 3-1/4" Chrome Magnetic Ring Oil Filter fits '86-'22 Sportster (Except RH Sportster), '09-'12 XR1200/X Models (OEM #63806-83, 63796-77A, 63805-80A) Features: High-quality chrome spin-on-style oil filters Magnetic filters are...