Chopper Parts

Biltwell - Recoil Grips for 7/8 Inch Handlebars Biltwell's Recoil Grips are made from Krayton rubber, that's the same stuff the BMX and Dirtbike grips you grew up with are made of. These grips will wear quicker than a conventional handlebar grip...

Magnum BYO Universal Brake Lines Inverted Flare Fittings The Magnum Build Your Own Universal Brake lines are designed for the "do-it-yourself-er." These are made from tough and durable stainless steel which means they were built to last. So if you cant...

This Alloy Art  Riser Bushing Kit features Gooden Tight Riser Bushings, flatch mounting bolts, and billet washers. Special cup washers hide the bolt heads for a clean installation Made in the USA 1/2"-13 x 3" (coarse)

V-Twin Chopper Style Gas Tank 2.5 Gallon - Screw-In Style Cap This V-Twin chopper style gas tank has a 2.5 gallon capacity and features a screw-in style forward and high gas cap opening. The front edge to the mounting holes measures 15", the front...

VT No: 25-2253 Cast 4" dog bone riser set solid brass construction with polished finish. Top and bottom clamps are for 1" bars. Set of two. Order pinch bolts and acorn nuts separately. Solid brass polished to a high luster which can be aged and patina...

V-Twin Smooth Solo Seat - Thick Bates style solo seat made of black vinyl. Center to center measurement on spring mount studs for front is 4-1/4" and for rear is 7-1/8". Measurements: Length: 12-1/2" Back Width: 9-1/2" Thickness: 4cm Middle...

V-twin black vinyl solo seat features a metal base-plate which includes studs for mounting springs and nose brackets. Order mount kits and nose T bracket separately. The two spring studs under the solo seat measure 3-1/8" center-to-center in the front...

HardDrive - Rectangular Custom Die Cast Mirror - Black These Custom Die Cast Mirrors are small, but will still give you the visibility to see what is coming up behind you. Features: Sold in Pairs Black anodized finish  

V-Twin Hand Control Kit Black  9/16" Bore Master Cylinder Old school black hand lever assembly includes clutch and brake. Master cylinder is 9/16" bore for single caliper use. Fits: Custom application

Biltwell - Tracker Mid Handlebars 7/8" Biltwell has done it again- these low profile Tracker Handlebars look great on just about any motorcycle! Choose from chrome or black, smooth or dimpled depending on what you ride. These are even lower than most...

ODI - Lock-On Grips fits '18 & Up TBW Indian Touring Models These ODI Lock-On Grips for '18 and up Indian Models are available in your choice of black-on-black, black-on-graphite or black-on-bronze. Features Moto-Inspired grip system...

The Emgo Jack Hammer Grips can go on any style bars. They have a classic look featuring ribs along the length of the grip. For 1" bars Sold in Pairs

TC Bros. Choppers pair of Custom Weld on Chopper/Bobber Solo Seat Spring mounts. GREAT FOR TORSION STYLE SPRINGS. CNC Machined from 1018 cold rolled steel and are ready to weld on. Stainless Steel Studs are 5/16"-18 thread and base is 1" diameter...

Motorcycle Supply Co Bezel 5" Black Headlight - Clear Lens Black housing with clear lens and 5" bezel Specs: Black Housing. 3 Wire High/ Low Beam Fitment: Custom Applications

V-Twin - Invader Grilled Tail Light Assembly This Invader Grilled tail lamp has a red lens and chromed housing. Dimensions: Center to center of bracket holes 4"-3/8 4" wide 5" tall Fitment: Custom Applications

Biltwell - Torker TPV Grips - 7/8" (Choose Color) These grips are more durable and UV resistant. TPV has proven to be heartier in all conditions yet retains the soft and supple nature expected from Biltwell grips. Features: Constructed from...

EMGO Shorty Muffler Chrome The Emgo Shorty Muffler is a simple looking muffler. The perfect addition to your motorcycle if you're looking for something subtle and classic. This universal muffler can be mounted to either the left or right side of your...

V-Twin - Old School Chopper/ Bobber Polished Hand Lever Assembly 9/16" Bore Master Cylinder This old school polished hand lever assembly fits 1" handlebars and includes clutch and brake lever/perch assemblies. This setup is perfect to clean up your bars...

V-Twin LED Tail Light - Chrome w/ Red Lens LED round tail lamp is chrome with red lens includes a 2 bolt adjustable base mount. Tail lamp measures 2-1/4" in diameter and 2.204" long. Does not have license plate light provisions. Fitment: Custom...

Motorcycle Supply Co. Black/ White Vintage Cloth Covered 16 Gauge Wire - 25' Length It's the small things that make a nice bike build stand out. Clean up your motorcycles wiring with this great looking 16 gauge cloth wire, this is perfect for cleaning...

HardDrive - Oval Custom Die Cast Mirror - Black These Custom Die Cast Mirrors are small, but will still give you the visibility to see what is coming up behind you. Features: Sold in Pairs Black anodized finish  

HardDrive - Rectangular Custom Die Cast Mirror - Chrome These Custom Die Cast Mirrors are small, but will still give you the visibility to see what is coming up behind you. Features: Sold in Pairs Chrome Finish  

Motorcycle Supply Co Unity 5" Copper Headlight This 5" chopper/ bobber headlight will add a custom look to your motorcycle. Specs: Copper Housing. 3 Wire High/ Low Beam. 5" Wide, 4" Deep. Fitment: Custom Applications

V-Twin Rear Fender Brace Set for Rigid - Chrome Mount brace set allows any width fender to be bolted to these bars. Fender brace is for rigid frames. Features:   Set of two Braces are 9-1/2" long chrome finish Mount holes measure 5/16" in...

LA Choppers - Stainless Steel One Piece Kage Fighter Welded Bent-Riser Handlebar LA Choppers is proud to present the only stainless steel T-Bar on the market! This handlebar is a great addition to any stainless steel exhaust or accessory on your bike...

EMGO Bolt On Oval Head Mirrors  The EMGO Die-Cast Mirrors are designed to have a Harley Davidson style. Theses are constructed from tough aluminum so you know they'll last. Available in bolt on style making the application process super easy...

The Emgo GT Grips have a old-school look with some extra comfort For 7/8" bars 5 1/4" in length Sold in Pairs

TC Bros. DIY Sissy Bar Kit will fit your bike perfectly! The Kit include: Precision CNC bent sissy bar hoop Axle plate mounting tabs 3/8-16 threaded radius bungs mounting bolts leather washers to protect your paint. Just trim the hoop to...

V-Twin Saga Gas Tank 3 Gallon - Bung Style Features: right side petcock opening. dished teardrop pop out sides fuel capacity of 3.0 gallons. uses a bung style cap which is not included. End to end of mounting tabs measures 19-7/8 Accepts 3/8"...

Motorcycle Supply Co. Blue/ White Vintage Cloth Covered 16 Gauge Wire - 25' Length It's the small things that make a nice bike build stand out. Clean up your motorcycles wiring with this great looking 16 gauge cloth wire, this is perfect for cleaning up...

Motorcycle Supply Co. - Bezel 5" Chrome Headlight - Amber Lens This headlight has a 5" bezel, chrome housing and clear lens. Specs: Chrome Housing. 3 Wire High/ Low Beam Fitment: Custom Applications

Biltwell - Utility Clip on Mirrors 1" Biltwell Inc. has come up with a ball and socket assembly making these mirrors reversible. This allows the rider to mount these mirrors on the clutch or throttle side. These timeless mirrors are just big enough, so...

V-twin large, thin, tuck and roll style solo seat features black vinyl covering on a steel base plate. Measurements Length: 13" Width: 14" Thickness: 6 cm  Fits: Custom application

V-Twin Fat Bob Steel Rear Fender - Right Side Chain Relief Bobbed rear fender for rigid models has a raw finish with a right side relief for the chain (right side of the bike while on the bike facing handlebars). Measurements: 7-1/4" wide and 5-1/5"...

V-Twin - Red Glass License Plate Reflector Set This reflector set measures 1" in diameter and features a stud, a spring and a wing nut. The reflectors have a faceted design to match the original.  

The Emgo GT Grips have a old-school look with some extra comfort For 1" bars 5 1/4" in length Sold in Pairs

HardDrive - Vintage Style Custom Die Cast Mirror - Black These Die Cast Mirrors are small, but will still give you the visibility to see what is coming up behind you. Features: Sold in Pairs Black anodized finish  

Speed Merchant  Speed Grips - Dual Cable Fits '1" Bars The Speed Merchant Speed Grips are machined from Billet Aluminum right here in the US. Features: Slim grip for comfort For 1” bars Machined from 6061 billet aluminum. Fits 84-15 HD...

V-Twin 4" Headlight - Chrome w/ Clear Lens Features: Chrome 4" bottom mount deco headlamp features a longer tapered shell with a 12 volt 60/55 watt H-4 bulb. Includes mount block and stud. Headlamp does not have a hi-beam indicator...

Drag Specialties - Round End Universal Seat Hinge Bracket - 7½" L X 1⅞" W  NOTE: Width given is the width of the front mount. Features Chromed brackets permit seat to flip over gas tank for easy access to engine components Round style...