Fenders

Mustang Fender/ Seat Nut Kit Features: Fenders with a plastic plug rather than a nut insert will need to remove plug and use this nut kit to mount solo seat or passenger seat 1/4" -20

TC Bros. Choppers universal fit, weld-on fender mounting bracket is constructed from a single piece of 1/4" thick American made mild steel for easy welding. Vintage style curves and contours provide eye appeal while the 5/16" diameter mounting holes...

V-Twin Rear Fender Brace Set for Rigid - Raw This allows any width rear fender to be mounted to this brace set. Features: Fender brace is for rigid frames. Set of two. Braces are 9-1/2" long with raw finish. Mount holes measure 5/16" in diameter. ...

Universal fender strut kit for choppers and bobbers. Kit includes: 4 CNC Machined steel bungs with 3/8-16 threaded hole and two 12" long 1/2" diameter steel rods.   Everything is made from 1018 mild steel for easy welding!

V-Twin Steel Rear Fender - 5" Round Profile Raw for Bobber/Chopper Round profile chopper fender is a round British style without rib. Note: All fenders are shipped raw. Fenders have tooling marks on the rolled or beaded ends from the manufacturing...

Raw fender has a thickness of 1mm. Will fit 2004-up XLH model. This chopped rear fender is shorter then the bobbed style and is recommended that a side mount tail lamp be used. A stock tail lamp will not fit with this fender. We suggest pre-fitting the...

V-Twin Rear Fender Struts for Harley Davidson FXR V-Twin is known for having high quality products at reasonable prices. These struts are just that. They're available in a chrome finish and are made from durable material so you know they'll last. Get on...

V-Twin Rear Fender Brace Set for Rigid - Chrome Mount brace set allows any width fender to be bolted to these bars. Fender brace is for rigid frames. Features:   Set of two Braces are 9-1/2" long chrome finish Mount holes measure 5/16" in diameter...

V-Twin Fat Bob Steel Rear Fender - Right Side Chain Relief Bobbed rear fender for rigid models has a raw finish with a right side relief for the chain (right side of the bike while on the bike facing handlebars). Measurements: 7-1/4" wide and 5-1/5"...

Hofmann Designs - 19" Mid Length Bagger Carbon Fiber Front Fender These side covers are compatible with a wide array of Harley Davidson models, so please reach out to use if you have trouble finalizing your order. Fender fitments available in your...

RWD - Rear Fender W/ Taillight and License Plate Holes This RWD Fender has pre-drilled license plate bracket holes and taillight cutout for traditional taillight mounting. It is made of stamped 14-gauge steel construction and is made in the USA...

The HardDrive FXR Rear Fender Features: Reproduction fender with all OE mounting holes for struts, lights, etc. Heavy duty steel construction (unpainted) Fitment: '82-'94 FXR (OE 59634-81A)

V-Twin Round Rear Fender - 6" Features: Round profile chopper/ bobber raw fender is 6" wide and ribbed type with center bead. Made from .032" thick steel Specs: Length Tip to Tip: 27-1/2" Width: 6" Thickness: .9mm

Bobbed rear fender for rigid models has a raw finish with a left side cutout. Fender measures 7-1/4" wide and 5-1/2" deep and does not include bracket. We suggest pre fitting the fender prior to painting. Fits:Custom application for rigid frame

RWD Rear Fender 7.5" - fits '91-'05 Dyna Features: Raw Finish 42" Length 7-1/2" Width Steel Fitment: YearMakeModel 1992 Harley-Davidson Dyna Glide Custom FXDC 2005 Harley-Davidson Super Glide Custom EFI...

HardDrive Bobbed Rear Fender Fits Harley-Davidson 1982-Up Sportster Models The bobbed fender by HardDrive is constructed of 16G steel, with a raw finish. 2007 and Up models require a cut-out for the ECM to be made. '82-'03 Fender is about 6.5" wide...

Gasbox Spun Steel Fender: Bare steel fenders made from 15-gauge steel Fenders are individually handmade and are the perfect fit for vintage-style tires Hug the tire, but allow adequate clearance and follow the profile of the tire exactly 27 1/4"...

V-Twin Steel Rear Fender 6" Round Profile - Raw Smooth round profile chopper fender has a thickness of 1.05 mm. Fits: Custom application

V-Twin Front Fender: Motorcycle Front fender is constructed of a steel shell riveted to a steel bracket. Fender has a raw finish. For use on 18" wheels. We suggest pre-fitting the fender prior to painting. Fits:XL 883L 2010-UPXL 883N 2010-UPXL 1200L...

Paughco Flat Fenders: 5 in. Timeless classic chopper look and old-school style Flat steel fender without mounts or holes Measures 5"W x 41-1/2"L x 13"H Requires custom support unless used on rigid frames 6 in. 42 in. long for custom...

Russ Wernimont Designs Retro Front Fenders Fits FXD, FXR, and XL Models Russ Wernimont Designs front fenders are an easy way to give your Harley a retro look. Made from durable, heavy steel, with a raw finish, these fenders are not only rad looking but...

The HardDrive Big Twin Rigid Rear Fender: Fitment: '49-'57 Big Twin Models '36-'48 Big Twin Models

The Biker's Choice Custom Narrow Glide Front Fender: Designed for use when converting a narrow glide front end to a 21 in. wheel Chrome plated steel brackets riveted in place included Raw steel finish Fitment: '91-'05 FXD '82-'94 FXR '73-'86...

Colony Front Fender Mounting Kit: Direct replacement for the stock fender hardware Includes all hardware to install front fender Made in USA

Klock Werks - Hugger Series Front Fender Mounting Blocks Features: Use with Klock Werks' Hugger Series front fenders, or they can also be used for a variety of custom applications Machined from billet aluminum and are available in a chrome or raw...

The Biker's Choice Custom Wide Glide Front Fender: Narrow front fender comes with integral chrome-plated 21 in. steel brackets. Raw steel finish Fitment: '84-'17 FXST '93-'05 FXDWG '80-'86 FXWG

Biker's Choice Fat Bob Rear Fenders: 38 in. long, 6 3/4 in. wide, 5 1/2 in. deep The popular Fat Bob look designed for custom applications Left chain cutaway Raw-steel finish Fits Big Twin custom applications

Slyfox - Matte Black Carbon Fiber Front Fender fits '14 & Up Touring Models w/ 19" Wheels This fender is built with prepeg carbon fiber material and features aerospace-grade and military spec. It comes with the necessary hardware for an easy...

RWD Dyna/FXR Front Fenders - Raw If you want to improve the look of your Dyna or FXR the RWD Front Fenders will do just that. Features: Improves the appearance of your bike Made from 16-gauge steel with an unfinished, raw steel finish 51/2​" wide;...

The Outlaw Fender: Fits 21" wheels Undrilled for custom application Raw steel

Saddlemen - Fender Eliminator Bracket fits '86-'03 XL Sportster Models Transform your Harley Davidson Sportster to the traditional XR style with this easy installation part from Saddlemen. It quickly slides under the front seat mount tab and boltd to...

Kodlin - Wide Rear Fender fits '18 & Up M8 Softail Models Features Designed for wide M8 Softail frame for 240/250 rear tires Comes in raw steel – unpainted State of the art quality, bolts right on to the frame No modifications to the...

Kodlin - 21" Front Fender fits '13-'20 Softail Breakout Models Features Designed for 21” front wheels Made out of steel – unpainted Fits Harley-Davidson Softail Breakout FXSB, FXSBSE, FXBR/S We recommend to use of 4 x 5/16 washers for...

Arlen Ness - 39/49 Pro Short Steel Front Fender Fits '99-'05 Dyna, '88-'20 XL Models W/ Narrow Glide 39mm Forks Add a unique design to your Harley Davidson front end with this short Arlen Ness front fender, made from 14 gauge stamped steel right here in...

Slyfox Carbon Fiber Front Fender - fits '14-Up FL Features: Carbon Front Fender Fits FLH 2014+ Fits 19” wheel Made with prepreg carbon fiber material Autoclave cured Aerospace grade Mil spec Hardware included Made in USA Fitment 2014-2016...

RWD Rear Fender 7.5" - fits '18-'19 FXBB Features: Raw Finish 35" Length 7-1/2" Width Steel Fitment: '18-'19 Softail Street Bob FXBB  

Arlen Ness Profile Front Fender, 21" Fits Harley-Davidson 18-Up FXBR, 13-17 FXSB Breakout Models This medium-length fender by Arlen Ness has a natural finish, designed to give a curvaceous look which snugly wraps around the front tire...

Arlen Ness Pro Short Front Fender Fits Harley-Davidson FXBR, FXSB Breakout Add a custom look to your Harley Breakout with the Pro Short Front Fender by Arlen Ness. Features Performance inspired short front fender Stamped from one piece of 14-gauge...

Russ Wernimont Designs Custom Rear Fender Fits '06-'17 Dyna Looking to customize your Dyna? Russ Wernimont Designs has the perfect rear fender for you. The one piece, stamped steel construction has predrilled fender mounting holes and welded in wiring...

V-Twin - Polished Replica Rear Fender Strut Set fits '87-'94 FXR Models This replica rear fender strut set has a polished finish. Fitment FXR 1987-1994