Clutch, Driveline & Trans.

Jims - 786 6-Speed Seal Installation Tool fits all '06-'20 6-Speed H-D Model w/ Cruise Drive Features: Harley-Davidson’s® new 6-speed transmission is a very stout piece of engineering, incorporating some of the best bearings made JIMS®...

Jims - 5810 Left Main Seal Installer Tool fits '17-'21 M-Eight Models Features: For use on Milwaukee Eight series engines

Jims - 1168 Primary Cover Inspection Plug Tool fits '57-'90 Sportster Models Features: Use this tool to remove and install primary inspection plug Made in the USA

Jims - 1664 5-Speed Transmission Shifter Shaft Sleeve Tool fits '80-'83 FLT/​FLHT/​FXR, '84-'99 Big Twins & '84-'00 FLHT/​FXR/​FXD Models Features: Can be used to remove, install replacement or upgrade shifter shaft sleeve, assembly and drum Use...

Jims -1004A Clutch Hub Puller Features: Will also work on Big Twin motor sprocket, alternator cover and early XL clutches as well as many other applications Can be used on 3-, 5- or 10-finger clutch hubs and 45" clutch hubs Made in the U.S.A.

Jims - 38515-90 Clutch Spring Compressor fits '90-'97 Big Twin & '91-'03 Sportster Models Features: For '91-'03 XL applications, compressor nut must be used in conjunction with compressor tool Used to release clutch spring so retainer ring can...

Jims - 34761-84 Clutch Spring Tool fits 'L84-'90 Sportster Models Features: Use to release the clutch spring tension for disassembly Made in the U.S.A. Fitment 1988-1990 Harley-Davidson Sportster 1200...

Jims - 1745 Bearing Simulator fits '70-'02 Big Twin Models Features: Designed to allow quick and easy removal and replacement of flywheel assembly in the left-side crankcase when checking rod-to-case, piston-to-flywheel or cylinder-to-flywheel...

Jims - 2260 Sprocket Lock Tool fits '99-'17 Twin Cam & '80-'99 Big Twin Models w/ Rear Belt Drive Features: Lock the transmission pulley for removing or installing pulley nut Made in the U.S.A...

Jims - 2189 Transmission Shaft Installer fits '83-'06 Big Twin Models Features: Installs transmission shaft without the use of a hydraulic or arbor press Made in the U.S.A. Fitment 2008 Harley-Davidson Fat Bob...

Jims - 1700 Main/Shaft Clutch Gear Tool fits '36-'86 Big Twin Models w/ Kick-Start 4-Speed Transmission Features: Removes kick starter clutch gear successfully, without damage to the gear Made in the U.S.A...

Jims - 2324 Sprocket Shaft Installer fits '95-'03 Sportster & '95-'02 Buell Models Features: Installs sprocket seal to proper depth Use with JIMS® Driver Handle Holds seal perfectly square Made in the U.S.A...

Jims - 95660-85 Transmission Main Seal Driver fits '85-'06 Big Twin 5-Speed Models Features: Optional drivers used in conjunction with main shaft seal tool allow installation of seals Fitment 2002 Harley-Davidson Softail Fat Boy EFI...

Jims - 1720 Main Bearing Remover fits '80-'06 Big Twin 5-Speed Transmissions Models Features: Removes old bearing straight and will not damage the transmission case Can be used without removing transmission from the bike Made in the U.S.A...

Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket Made in the U.S.A. Fitment 2016-2017 Harley-Davidson 1200 Roadster...

Jims - 39361-69 Sprocket Shaft Seal Installation Tool fits '69-'10 Big Twin & Twin Cam Models Features: Designed to press oil seal over sprocket shaft into case Made in the U.S.A. Fitment 2010 Harley-Davidson Street Glide Trike...

Jims - 34902-84 Mainshaft Bearing Race Tool fits 'L84-'20 Big Twin Models Features: Used to remove and install the inner bearing race on the transmission mainshaft Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Fat Boy S...

Jims - 34734-80 Main Drive Gear Bearing/Seal Installer Tool fits '80-'90 5-Speed Big Twin Models Features: Holds bearings and seal square to its bore, eliminating any marring Install both bearings and seal with use of a one-ton press Install...

Jims - 97235-55B Sprocket Shaft Bearing Nut Tool fits '55-'68 Big Twin Models Features: Used to install and remove bearing nut Made in the U.S.A. Fitment 1965-1968 Harley-Davidson Electra Glide...

Jims - 33096-54B Kickstarter Shaft fits '36-'86 Big Twin Models Features: Precision-machined replacement shaft Made in the U.S.A. Fitment 1984 Harley-Davidson Electra Glide Special FLHX - - 1983-1985 Harley-Davidson Low Rider...

Jims - 94547-80B Sprocket Shaft Bearing Race Tool fits '77-'03 Sportster, '94-'02 Buell Models Features: Must use with JIMS® Race and Bearing Install Handle (PART# DS-196042) Used to remove and install Timken® bearing race on motor...

Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models Features: Used on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing Made in the U.S.A...

Jims - 97081-54 Sprocket Shaft Bearing Press Tool fits '55-'76 Sportster Models Features: Use on '55-'76 XL and K models to install the flywheel assembly into the left crankcase Timken® bearing Optional sleeves sold separately for use on '86-'03...

Jims - 33428-78 Main Drive Gear Bearing Tool fits '79-'84 4-Speed Big Twin Models Features: Use to install the main bearing (Harley-Davidson® #8905) to the correct depth Made in the U.S.A. Fitment 1984 Harley-Davidson Electra Glide...

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive transmission pulley Extra-long two-piece design Made in the...

Jims - 95960-52C Clutch Hub Puller fits '36-'90 Big Twin Models Features: Used to remove wet and dry clutch hubs without removing clutch release rod 4 bolts included for dry clutch removal Made in the U.S.A...

Jims - 94557-55A Compensating Sprocket Socket Head fits '55-'70 Big Twin & Sportster Models Features: Used to remove and install compensating nut Made in the U.S.A. Fitment 1965-1970 Harley-Davidson Electra Glide...

Zipper’s - Chain Conversion Kit with Gold RK O-Ring Chain fits 2000-2005 Dyna Models Zipper’s makes it easy to convert your 2000–2005 Dyna from belt to chain with this all-in-one performance kit. Designed for strength, reliability, and...

Belt Drives Ltd. - Extra Plate Clutch Kit fits '41-'E84 Big Twin Models Features: Four tempered steel drive plates also included Clutch plates are 20% wider than stock for improved clutch engagement and holding Both kit clutch plate stack height...

Belt Drives Ltd. - CC-100-CP Replacement Competitor Friction Plates Features: Replacement plate sets for BDL's competitor clutch sold separately Made in the U.S.A.

Belt Drives Ltd. - BDLPCP-0007 Replacement Clutch Kit for Rivera Primo Pro Clutch fits '90-'97 Evolution Big Twin Models Features: Complete replacement clutch plate kits for Primo Rivera belt drives listed Include all friction plates, drive plates...

Belt Drives Ltd. - BDLPCP-0011 Replacement Clutch Kit for Brute V w/ New-Style Hub Features: Complete replacement clutch plate kit Include all friction plates, drive plates and backing plates needed

Belt Drives Ltd. - BDLPCP-0012 Replacement Clutch Kit fits '07-'10 Pro Clutch Features: Complete replacement clutch plate kit Include all friction plates, drive plates and backing plates needed

Belt Drives Ltd. - BDLPCP-0013 Replacement Clutch Kit for Rivera Primo Pro Clutch fits '98 Big Twin Models Features: Complete replacement clutch plate kit Include all friction plates, drive plates and backing plates...

Belt Drives Ltd. - BDLPCP-0029 Replacement Clutch Kit for Rivera Primo Pro Clutch Features: Complete replacement clutch plate kit Include all friction plates, drive plates and backing plates needed

Belt Drives Ltd. - BDLPCP-0041 Replacement Clutch Plate Kit for Pro Clutch fits '36-'84 Big Twin Models Features: Complete replacement clutch plate kit Include all friction plates, drive plates and backing plates needed

Belt Drives Ltd. - BDLPCP-0200 Replacement Clutch Kit fits '11-'17 Rivera Primo Pro Clutch Features: Complete replacement clutch plate kit Include all friction plates, drive plates and backing plates needed

Belt Drives Ltd. - CC-100-CS Replacement Competitor Clutch Steel Plates Features: Replacement plate sets for BDL's competitor clutch sold separately Made in the U.S.A.

Belt Drives Ltd. - BDLPCP-0001 Brute III Replacement Clutch Kit fits '07-'17 Touring w/ Mechanical Clutch Features: Complete replacement clutch plate kits for Primo Rivera belt drives listed Include all friction plates, drive plates and backing...

Belt Drives Ltd. - BDLPCP-0005 Replacement Clutch Kit for Rivera Primo Pro Clutch fits 'L84-'89 Evolution Big Twin Models Features: Complete replacement clutch plate kits for Primo Rivera belt drives listed Include all friction plates, drive...