Harley Davidson Parts

Accutronix - 12" Bandit Riser Kit W/O Gauge Mount Adapter (1-1/8" Clamping Area) Available in your choice of a black or chrome finish.  The clamping area on these risers is 1-1/8" | You will need handlebars with a 1-1/8" clamping area to run these...

Joker Machine Black Fork Tube Turn Signal Clamps for Harley Models These low profile fork tube turn signals are made from some of the best material- 6061 billet aluminum. Easily mounted with the included hardware and available in a black finish. Clean...

HardDrive Argyle Foot Pegs Features: Machined from billet 6061-T6 aluminum The moto peg designed diamond pattern is machined into the contact area which gives a non-slip platform in any condition Sold in Pairs Straight male mount set

Wild 1 Phsycho Street Fighter 12" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

V-Twin - Billet Pivot Block Set fits '82-'94 FXR Model Natural right and left pivot block set feature machined aluminum from solid billet. Fitment: FXR 1982-1994

V-Twin - Shifter Sleeve Kit fits '84-'94 FXR Model FXR shifter sleeve kit includes a nylon sleeve, lock tab and 2 o-rings Note: The long sleeve goes between the two outer brass bushings - one is the inspection cover and one is the inner primary...

V-Twin - Mid Control Kit Chrome W/ Footpegs fits '87-'93 FXR Model FXR mid control kit includes chrome bracket, pedal footpeg mounts, and stock driver footrests. Fitment: FXR 1987-1993

Drag Specialties - Front Brake Stoplight Switch fits '86-'95 Sportster Models (OEM #71590-92, 71590-92L) Features: OEM-replacement switch kits Meet or exceed OEM specifications Fit U.S.A. and international models  

Drag Specialties - 32-1/2" Black Vinyl Throttle Cable (Repl. OEM #56324-81/ 56324-81A/ 56324-81B/ 56324-81C) Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner for...

Drag Specialties - 52" Black Vinyl Throttle Cable fits '88-'95 XL Sportster & '90-'95 Big Twin Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an...

Drag Specialties - 58" Black Vinyl Throttle Cable fits '88-'95 XL Sportster & '90-'95 Big Twin Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an...

Drag Specialties - 41-1/2" Black Vinyl Idle Cable '96-'17 Big Twin, '07-'22 XL Models (Except '99-'01 EFI Dressers, '21-'22 XL S/RH 1250S, '22 Nightster/RH975) - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer...

Drag Specialties - 34-1/2"  Black Vinyl Idle Cable fits '88-'95 XL Sportster & '90-'95 Big Twin Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and...

Drag Specialties - 63-11/16" Black Vinyl High-Efficiency Clutch Cable (Repl. OEM #38606-87A) Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for smooth...

Drag Specialties - 53-5/16" Black Vinyl High-Efficiency Clutch Cable (Repl. OEM #38599-83A) Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for smooth operation High-performance...

Drag Specialties - Crankcase Breather Kit fits '93-'17 Big Twin Models (Exc. '17 FXDLS, '16-'17 Softails & '08-'17 Dressers) Features Comes with breather bolts, washers and hardware Works with most aftermarket air cleaners One-piece chrome tube...

Saddlemen - Unknown Step Up Seat fits '82-'00 FXR Models Features Often imitated; never duplicated. The original Harley-Davidson stunt seat. Saddlemen seats with GELcore Technology are the only motorcycle seats scientifically proven to reduce...

Wild 1 Chubby Flatline 12" Handlebars Features: 1-1/4" diameter Drilled for internal wiring Chrome Made in USA Measurements: 12" TALL 24" WIDE FLAT 0" PULL BACK 0° WRIST ANGLE

Wild 1 Physco Street Fighter 14" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

Wild 1 Physco Street Fighter 10" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

Jims - 1709 Sprocket Shaft Bearing Tool fits '77-'02 Big Twin Models Features: Tool is used to remove the sprocket shaft Timken® bearing on late '86-'02 Big Twins with an integral sprocket shaft Does the job better than anything else on the...

Jims - 95660-85 Transmission Main Seal Driver fits '85-'06 Big Twin 5-Speed Models Features: Optional drivers used in conjunction with main shaft seal tool allow installation of seals Fitment 2002 Harley-Davidson Softail Fat Boy EFI...

Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket Made in the U.S.A. Fitment 2016-2017 Harley-Davidson 1200 Roadster...

Jims - 2233 Tappet Oil Filter Plug Tool fits '70-'99 Big Twin Models Features: Removes oil screen without removing exhaust Used to remove the tappet oil screen plug Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Jims - 94547-80A Sprocket Shaft Bearing Race Tool fits '69-'02 Big Twin Models Features: Must use with JIMS® Race and Bearing Install Handle (PART# DS-196042) Used to remove and install Timken® bearing race on motor cases Made in the U.S.A...

Jims - 34734-80 Main Drive Gear Bearing/Seal Installer Tool fits '80-'90 5-Speed Big Twin Models Features: Holds bearings and seal square to its bore, eliminating any marring Install both bearings and seal with use of a one-ton press Install...

Jims - 1012-70TB Cam Bushing Installer fits '70-'99 Big Twin Models (Except Twin Cam (OEM #25581-70)) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking...

Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...

Jims - 1013-54TB Pin Bushing Installer fits '54-'92 Big Twin Models (OEM #25582-54/73) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking dowel pin Made...

Jims - 95760-TB Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to keep rollers from falling into the crankcase Comes with...

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...

Drag Specialties - 3-1/4" Chrome Magnetic Ring Oil Filter With Nut fits '86-'22 Sportster (Except RH Sportster), 09-12 XR1200/X Models (OEM #63806-83, 63796-77A) Features: High-quality chrome spin-on-style oil filters Magnetic filters are designed...

Drag Specialties - Paper Oil Filter with Spring fits '65-'82 FX/FL, '57-'78 Sportster Models (OEM #63835-87T, 63837-92T, 6383940-53) Features: High-quality drop-in oil filter Fitment 1982 Harley-Davidson Super Glide II...

Belt Drives Ltd. - BDLPCP-0007 Replacement Clutch Kit for Rivera Primo Pro Clutch fits '90-'97 Evolution Big Twin Models Features: Complete replacement clutch plate kits for Primo Rivera belt drives listed Include all friction plates, drive plates...

Colony - 8703-2 Relief Valve Plug Kit fits '81-'84 Big Twin Models (OEM #26263-80) Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

V-Twin - Oil Pump Pressure Valve Stainless Steel fits '82-'91 FXR, '86-'91 FLST, '84-'91 FXST Models Machined stainless steel oil pump pressure valve for Big Twins. Fits oil pressure relief valve port on oil pumps. Used as an oil pressure indicator...

V-Twin - Transmission Motor Support fits '82-'94 FXR Model Zinc plated transmission motor support features laser cut 1/4" steel with all holes in place. Includes the tab for front exhaust mounts. Acts to absorb torque between the drive train...

Drag Specialties - 40 Spoke Chrome Laced Wheel 21” x 2,15.” fits '99 FXD, '86-'99 XL (Single or Dual Disc (OEM #43557-87)) Features: Valve Stem: CMV (Center Metal Valve) Uses OEM mounting hardware; designed to use OEM style rotors,...

Drag Specialties - 40 Spoke Chrome Laced Wheel 19” x 2.5” fits '86-'99 Sportster (OEM #43312-84) Features: Valve Stem: CMV (Center Metal Valve) Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully...

Drag Specialties - 40 Spoke Chrome Laced Wheel 19" x 2.5" fits '78-'83 FXR/FX, '78-'83 XL (Dual Disc (OEM #43341-78)) Features: Valve Stem: CMV (Center Metal Valve) Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and...