Harley Davidson

V-Twin - Oil Pump Pressure Valve Stainless Steel fits '82-'91 FXR, '86-'91 FLST, '84-'91 FXST Models Machined stainless steel oil pump pressure valve for Big Twins. Fits oil pressure relief valve port on oil pumps. Used as an oil pressure indicator...

V-Twin - Transmission Motor Support fits '82-'94 FXR Model Zinc plated transmission motor support features laser cut 1/4" steel with all holes in place. Includes the tab for front exhaust mounts. Acts to absorb torque between the drive train...

Wyatt Gatling - Shovelhead Chrome Rocker Box Line Kit fits '79-'83 FLT, '66-'84 FL, '82-'83 FXR Models Natural brass rocker box line kit includes "T" to oil the heads with 6mm brass tube and brass fittings. Tubes feature a chrome finish over the brass...

Wyatt Gatling - Brass Shovelhead Rocker Box Line Kit fits '79-'83 FLT, '71-'84 FX, '82-'83 FXR Models Natural brass rocker box line kit includes "T" to oil the heads with 6mm brass tube and brass fittings. Install hex fitting in the engine block...

Drag Specialties - Starter Solenoid fits '80-'88 FLT/​FLHT & '82-'88 FXR Models (OEM #31489-79) Features: Features zinc-finished moisture-proof case, hardened steel plunger and long-life contact disc Replacement Part for...

Drag Specialties - 40 Spoke Chrome Laced Wheel 21” x 2,15.” fits '99 FXD, '86-'99 XL (Single or Dual Disc (OEM #43557-87)) Features: Valve Stem: CMV (Center Metal Valve) Uses OEM mounting hardware; designed to use OEM style rotors,...

Drag Specialties - 40 Spoke Chrome Laced Wheel 19” x 2.5” fits '86-'99 Sportster (OEM #43312-84) Features: Valve Stem: CMV (Center Metal Valve) Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully...

Drag Specialties - 40 Spoke Chrome Laced Wheel 19" x 2.5" fits '78-'83 FXR/FX, '78-'83 XL (Dual Disc (OEM #43341-78)) Features: Valve Stem: CMV (Center Metal Valve) Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and...

Colony - Hydraulic Pushrods fits '66-'84 Shovelhead w/ Hydraulic Lifters (OEM #17904-66) Features: Aircraft-grade aluminum tubing Heat-treated steel tips Fits stock stroke lengths Made in the U.S.A...

Colony - Cylinder Base Nut Kit fits '78-'84 Big Twin Models (OEM #16838-78) Features: Individual chrome bolt and nut sets for specific applications Made in the U.S.A. Fitment 1984 Harley-Davidson Electra Glide Special...

Drag Specialties - Master Cylinder Update Kit fits '99-'05 Big Twin & '96-'03 Sportster Models (OEM #45005-05) Features: Kit includes decal, sight glass, screws and reservoir gasket Fitment 2005 Harley-Davidson Super Glide Custom...

Drag Specialties - Socket-Head Master Cylinder/Cover-Lever Mount Bolt Kit fits '86-'03 Sportster, '99-'17 Twin Cam Models (Except '08-'14 Dressers)

Drag Specialties - Chrome Socket-Head Master Cylinder Screws fits '99-'17 Big Twin, '96-'13 Sportster Models (Except '15-'17 Softails, '08-'17 Dressers, H-D FL Trike (OEM #45044-96, 42808-04)) Features: Socket-head screws for a number of...

Drag Specialties - Rear Master Cylinder Repair Kit fits '82-'85 FXR, 5/8” bore (OEM #42382-82A) Features: Rebuild kits fit a variety of H-D models listed Meet or exceed OEM specifications Include metal...

Drag Specialties - Front Master Cylinder Repair Kit fits '82-'85 Big Twin, '82-'E85 Sportster, 3/4” bore (OEM #45042-82, 45063-82) Features: Meet or exceed OEM specifications Fitment 1985 Harley-Davidson Low Glide Custom...

Drag Specialties - Rear Master Cylinder Repair Kit fits '99-'17 Big Twin (Except '15-'17 Softails, '08-'17 Dressers, H-D FL Trike) & 'L87-'03 Sportster Models (OEM #42382-87) Features: Rebuild kits fit a variety of H-D models listed Meet or...

Saddlemen - Pro Series SDC Performance Seat w/o Backrest - Tuck-n-Roll/Carbon Fiber Gripper fits '86-'94 FXR Models Features: True performance oriented comfort seat, best of both worlds with contoured lines and a bucketed driver’s seating area...

Drag Specialties - Oil Pressure Switch fits '84-'99 Evolution Big Twin Models (Except '87-'98 FLHT/​FLTR (OEM #26561-84)) Features: Precision-calibrated replacement oil pressure switches feature heavy contacts, brass pressure ferrules, thermo-plastic...

V-Twin - 25-1/2" Hard Chrome 35mm Fork Tube Set fits '85-'86 Sportster & FXR Models (OEM #45392-83) Features: Hard Chrome 35mm fork tube set has stock length of 25-1/2". For Showa front ends Before installing, compare new and old tubes Be sure...

Colony - Motor Case Kit fits '79-'95 Big Twin Models - Cadmium Features: Contain all necessary hardware to bolt together stock motor cases Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Colony - Head Bolt Set fits '86-'91 Sportster Models (OEM #16478-85A, 16480-85A) Features: 12-point replacement headbolts Made in the U.S.A. Fitment 1992 Harley-Davidson Dyna Daytona FXDB - - 1991 Harley-Davidson Dyna Sturgis...

Performance Machine - Throttle Housing fits Dual Thread-In Cables Features: For 1" handlebars Made in the U.S.A. Fitment 1995 Harley-Davidson Dyna Convertible FXDS-CONV - - 1995 Harley-Davidson Super Glide...

Drag Specialties - Oil Pressure Gauge Mount fits 80” Evolution Engines (Except FLT/HT/HS/HR/​Ultra) Features: Chrome mount attaches at the crankcase and rocker box mounting bolt, allowing an unobstructed view of your oil pressure Stock oil...

Drag Specialties - Chrome Oil Tank fits Most Aftermarket FXR Frames (OEM #62406-81) Features: Formed steel construction with a chrome finish Bolt-in application; uses OEM mounts Fittings, clamps and hoses included Approximately 3.0 quart...

V-Twin - Volt Tech Starter Drive fits Big Twin Models (OEM #31443-65A) Volt Tech starter drive features a high strength five roller clutch, stainless steel springs, hardened ramped clutch receivers, premium bronze bushing and factory pre-lubing...

V-Twin - Chrome Handlebar Control Kit 5/8" Bore Master Cylinder fits '84-'95 FX/XL & FXR Models Features: Chrome handlebar control kit, 3/4" bore, includes master cylinder, clutch handle with clamps, and two pairs of switch housings Master...

V-Twin - Chrome 48" Handlebar Switch Kit fits Big Twin Models Handlebar switch kit includes complete right and left switch assemblies, brake light switch, mounting screws, and clips. Switch kit measures 48" long and has a chrome finish. Fitment: FXR...

V-Twin - Swingarm Bearing Kit with Spherical Bearings fits '82-'02 FLT, '82-'94 FXR Models Swingarm bearing kit with spherical bearings controls lateral and torsional movement at pivot point Kit Includes: Swingarm retaining ring rear fork, nylon...

V-Twin - Black Front 1 Piston Caliper Set fits FXR & XL Models (OEM #44195-80) Features: Caliper set includes body, 1 piston, seals right and left, brake pads and inner and outer plates flat black finish Order mounting hardware separately Sold...

V-Twin - 35mm Fork Tube Set 23-3/8" fits '87 FXR, '86-'08 Sportster Models (OEM #45407-86) - Chrome Features: Fork tube set has stock length of 23-3/8" Before installing, compare new and old tubes Be sure the stock top plugs it into the new fork...

V-Twin - Brake Pedal Polished Alloy fits '82-'94 FXR Model (OEM #42523-82) FXR brake pedal has a polished alloy finish and includes the bushings installed Note: Must order rod end, wave washer, cotter pin and the master cylinder, which includes the...

V-Twin - Primary Gasket Kit fits '85-'94 FLT, '84-'93 FXR Models FXR/FLT Primary gasket kit is a three piece kit Fitment: FLT 1985-1994 FXR 1984-1993 Late 1984

V-Twin - Shifter Linkage Kit fits '81-'84 FXR Model FXR shifter linkage kit includes rod, heel toe shifter lever , shifter lever, V-Tech inspection cover and inner shifter lever. Fitment: FXR 1981-1984 early 1984 FXR 1984-1984 early 1984

V-Twin - Shifter Sleeve Kit fits '84-'94 FXR Model FXR shifter sleeve kit includes a nylon sleeve, lock tab and 2 o-rings Note: The long sleeve goes between the two outer brass bushings - one is the inspection cover and one is the inner primary...

V-Twin - Shifter Rod Assembly fits '82-'94 FXR Model (OEM #33728-82A) FXR shifter rod assembly includes right and left hand ball ends with nuts. For use on FXR mid control shifter installation. Fitment: FXR 1982-1984 FXR 1985-1994

V-Twin - Mid Control Kit fits '82-'86 FXR Model - Black Features: FXR mid control kit features a black peg brackets and polished brake pedal Factory style components for installation Order brake line, reservoir feed line and additional hardware...

V-Twin - Mid Control Kit Black W/ Gaskets & Footpegs fits '87-'93 FXR Model FXR mid control kit includes black foot peg mounts, polished brake pedal, primary insepction cover, chrome shifter and a chrome master cylinder Kit Includes: Factory...

V-Twin - Mid Control Kit Chrome W/ Footpegs fits '87-'93 FXR Model FXR mid control kit includes chrome bracket, pedal footpeg mounts, and stock driver footrests. Fitment: FXR 1987-1993

V-Twin - Mid Control Kit fits '83-'86 FXR Models - Chrome Features: FXR mid control kit features chrome mounts, chrome brake pedal and footpeg supports. factory style components for installation. Order brake line, reservoir feed line and additional...

V-Twin - Rear Brake Plunger Zinc Plated fits '82-'87 FXR Model (OEM #42437-82) Zinc plated FXR rear brake plunger features a 5/16" x 24 thread and measures 2-7/8" from the hole to the end of the thread. Note: The clevis pin is not...