Harley Davidson

Performance Machine - Harley Davidson Elite Apex Dual Cable Grips Ditch your stock grips and upgrade to the Performance Machine Elite Grips! These grips are durable and feature knurled rubber sleeves with an embossed PM logo wrapped around machined...

Rekluse RadiusX Auto Clutches This high performance clutch combines Rekluse's Torq-Drive and EXP technologies giving riders more power and control. Features: Dead-on clutch engagement everytime Take-off and stop in gear without using clutch lever -...

S&S Cycle - Air Cleaners fits '93-'06 Big Twin Models W/ Stock CV Carb These S&S Cycle Air Cleaners feature original S&S teardrop air cleaner assemblies and are available in your choice of chrome or gloss black. Features Include an...

S&S Cycle - Grand National Race Slip-On Mufflers fits '18-'22 Harley Softail Models - Black Ceramic These mufflers feature a race-inspired design and improved horsepower and torque (when used with a Stealth Air cleaner kit; sold separately. The...

TC Bros - 11.5" Center Hub Mount Rear Floating Brake Rotor fits '84-'13 Harley Models TC Bros.' Center Hub Mount Rear Floating Brake rotor has a full-floating design which holds true to the utmost rotor-caliper alignment. It decreases heat transfer from...

Two Brothers Racing - Comp-S 2-1 Exhaust fits '00-'17 Softail Models Available in your choice of three finishes: Stainless, Black, or Polished. Features Dyno tuned for maximum performance Billet turnout end cap Mandrel bent stainless steel...

V-Twin - Black Nose Cone Cam Cover fits '73-'93 Big Twin Models OEM #25268-84A V-Twin's Nose Cone Cam Cover is designed to fit Big Twin Models. The bushings are installed and a seal is included. NOTE: This cover comes with mounting screws, a gasket and...

V-Twin - Chrome Petcock W/ Nut and 90° Left Outlet fits '75-'94 Big Twin & '75-'95 Sportster Models This petcock is designed to be used with stock gas tanks or custom tanks with a 22mm outside thread. The shape of the petcock is built for a...

Vance & Hines - Shortshots Staggered Exhaust System This Exhaust System delivers hot rod sound and performance, wrapped in a full length heatshield. Features: Signature Twin Slash end treatment Full-coverage heat shields Available in chrome...

Vance & Hines -2-into-2 Big Radius Exhaust System fits '00-'09 Softail FXS/​FXST/​FLS/​FLST Models (Except '08-'09 FXCW/C, '09 FXSTSSE) - Chrome Features Big 2-1/2" full header and muffler heat shield system is virtually blue-proof Includes...

Willie and Max - Swingarm Bags with Brass Buckles fits '84-'17 Softail Models These Swingarm Bags are made with 100% leather right here in the U.S.A. Features Made in USA Durable leather swingarm bag construction uses OEM quality black leather and black...

Accutronix - Black Knurled Diamond Custom Grips for Cable fits HD Models Features Machined from 6061 T-6 Billet Aluminum Left grips are secured with three-screw set, while right grips come with throttle sleeve installed Dual cable...

The Accutronix Custom Grips are a great final touch to your custom bike build. High-quality brass construction Dual cable design Sold in pairs Made in the U.S.A. Fitment: YearMakeModel 2016 - 2017 Harley-Davidson Breakout (EFI)...

The Accutronix Custom Grips are a great final touch to your custom bike build. High-quality brass construction Dual cable design Sold in pairs Made in the U.S.A. Fitment: YearMakeModel 2016 - 2017 Harley-Davidson Breakout (EFI)...

Arlen Ness - 10-Gauge Lifter Block Covers fits '99-'17 Twin Cam Models These 10-gauge lifter blocks act as replacements for OEM lifter blocks and accept factory and aftermarket pushrod tubes. Available in your choice of a chrome, black anodized W/...

Arlen Ness - Chrome Six-Piston Differential Bore Front Brake Caliper for 14" Oversize Rotors This six-piston differential bore front brake caliper is built with two things in mind: form and function. It comes to you in a bright chrome finish and the...

Bassani Exhaust - 49-State 2-into-1 Road Rage III Exhaust System fits '18-'23 Softail FLSB/FXLRST Models - Stainless Features Designed for maximum horsepower & torque Stepped headpipes 1-3/4" into 1-7/8" Full heat shields Non-removable baffle...

Biltwell - 1" Tracker O/S High Slotted Handlebars (1-1/8" Clamping Area) These Tracker O/S High Slotted Handlebars from Biltwell feature a 4" end rise, a 30½" width, a 5" center width and a 2¾" pullback. They are available in your...

Biltwell Mushman Stepped Foot Pegs Features: Same as Biltwell's original Mushman Pegs, but stepped-up to raise your foot position Investment-cast stainless steel construction Each peg attaches with a single Allen cap screw to an infinitely...

Cometic - Oil Change Gasket Kit fits '06-'17 Twin Cam Models This kit comes complete with a derby cover gasket and 3 O-rings to correctly change primary, trans. and motor lubricant once. Features Gaskets have resistance to temperatures of more than...

Cycle Pro - Replacement Throttle Position Sensor fits '06-'17 Twin Models Repl. OEM#27659-06 This high-quality Throttle Position Sensor is a direct OEM replacement. It is designed to help riders reach the greatest possible fuel efficiency and power...

Daytona Twin Tec - Standard Plug-In Ignition Module fits '04-'06 Twin Cam & Sportster Carbureted Models W/ Single 12-Pin Connector This module features two advance curve families which are adjustable to work with stock and modified engines. It...

Deadbeat Customs Tracker-Back Handlebars - Red These "Tracker-Back" handlebars feature 5.5" of pullback giving them the tracker-back name, and are made from .120" chromoly steel tubing and come in a bright red finish. Dimpled for stock Harley Davidson...

Drag Specialties - Chrome Rear Fender Struts fits '00-'07 Harley FLSTC/S & FLSTN Models Repl. OEM #s 59954-03 & 5955-03 These beautifully chromed rear fender struts are sold in pairs. Fitment 2007 Harley-Davidson Softail Deluxe EFI...

Drag Specialties - 36-1/2" Black Vinyl Idle Cable fits '81-'89 Big Twin, '81-'85 Sportster Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner nylon liner...

Drag Specialties - 64-7/16" Black Vinyl High-Efficiency Clutch Cable (Repl. OEM #38666-00) Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for smooth...

Drag Specialties - Cam Cover fits '73-'92 Big Twin Models The bushings on this cam cover are installed, pinned and reamed to OEM specifications. Available in your choice of a satin black or chrome finish. Features Die-cast aluminum...

Drag Specialties - Cam Cover fits '93-'99 Evolution Big Twin Models The bushings on this cam cover are installed, pinned and reamed to OEM specifications. Available in your choice of a satin black or chrome finish. Features Die-cast aluminum...

Drag Specialties - Clutch Lever Bracket fits '99-'17 Big Twin, '96-'03 Sportster Models (Except '15-'17 Softail, '08-'17 Dressers, H-D FL Trike (OEM #38608-96)) Features: Made of die-cast...

Drag Specialties - Front Caliper Rebuild Kit fits '08-'14 Softail, '08-'17 Dyna Glide models (Except FLSTSB (Repl. OEM #44313-08)) Features: High-quality replacement components Fitment 2016-2017 Harley-Davidson Low Rider S...

Drag Specialties - Gloss Black Rear Sprocket fits 530 Chain '00-'21 Big Twin Models (Exc. Models W/ Cush Drive); 2.22" Center Diameter Choose from four different sprocket sizes: 46-tooth, 48-tooth, 49-tooth, 51-tooth...

Drag Specialties Outer Primary Cover fits '84-'85 FXST and '71-'84 FX/FXWG Drag Specialties outer primary kit is just what you need for your Harley Davidson if you're looking to switch it up a bit. Made from durable aluminum, this cover can withstand...

Drag Specialties - Premium Sintered Metal Brake Pads fits All '05-'07 Big Twin (Exc. FLSTS/FXSTS) & '05 V-Rod Models (Repl. OEM# 44082-00C) Replacement OEM# 44082-00C Features Premium sintered metal brake pads designed for H-D motorcycles More...

Drag Specialties - Side Hinge Ignition Switch fits '14-'23 FLHR/​FLHRXS , '11-'17 FLS/F LST, '12-'17 FLD, FXDWG, FXDF & FXDB MODELS (Repl. OEM #71517-11) Features: Includes two keys Fork lock available...

Drag Specialties - Side Hinge Ignition Switch fits '99-'11 FXDWG, '08-'11 FXDC/​FXDF, '00-'10 FXST/​FLST, '99-'13 FLHR Models (Repl. OEM #71313-96A) Features: Includes two keys Fork lock available...

Drag Specialties - Slotted Wide Blade Lever Set fits '99-'17 Big Twin, '96-'03 Sportster Models (Except '15-'17 Softail, '16-'17 FXDLS, '08-'17 FLHT/​FLHR/​FLTR/​FLHX & H-D FL Trike) Features: Wide blade levers sets are made with strong,...

Drag Specialties - Transmission Pulley 32 Tooth fits '94-'06 Big Twin Models (OEM #40250-94) Features: Heat-treated steel construction Direct OEM replacement Fitment 2006 Harley-Davidson Softail Heritage EFI...

Drag Specialties Handlebar Riser/Top Clamp Kits for 1" Diameter Clamping Area -1-1/2" Rise Chrome Get the complete set up with the Drag Specialties Handlebar Riser/Top Clamp Kit. Features: Sold as a kit of two risers, one-piece top clamp and all...

Drag Specialties Handlebar Riser/Top Clamp Kits for 1" Diameter Clamping Area - 10" Rise Gloss Black Get the complete set up with the Drag Specialties Handlebar Riser/Top Clamp Kit. Features: Sold as a kit of two risers, one-piece top clamp and all...

Drag Specialties Handlebar Riser/Top Clamp Kits for 1" Diameter Clamping Area - 9-1/2" Rise with 1-1/2" Pullback Chrome Get the complete set up with the Drag Specialties Handlebar Riser/Top Clamp Kit. Features: Sold as a kit of two risers, one-piece...