Fenders

Drag Specialties - 14010997 - Front FenderFeaturesNo rivet, smooth-sided steel constructionDesigned to fit FLSTF front ends with 16" wheelsReplacement Part for OEM Number(s):58900203SpecsUnitsEachProduct NameFenderRiding StyleStreetMounting...

Drag Specialties - 14010996 - Rear FenderFeaturesFender-mounting holes are drilled for easy installationReplacement Part for OEM Number(s):59500485ASpecsTypeOEM ReplacementMaterialSteelUnitsEachMounting PositionRearProduct NameFenderRiding...

Drag Specialties - 14010995 - Rear FenderFeaturesFender-mounting holes are drilled for easy installationReplacement Part for OEM Number(s):59500454SpecsProduct NameFenderUnitsEachMounting PositionRearRiding StyleStreetMaterialSteelTypeOEM...

Drag Specialties - 14010994 - Rear FenderFeaturesFender-mounting holes are drilled for easy installationReplacement Part for OEM Number(s):59500534SpecsTypeOEM ReplacementMaterialSteelMounting PositionRearProduct NameFenderUnitsEachRiding...

Drag Specialties - 14010747 - Rear Fender - SmoothFeaturesRaw steel constructionUndrilled, requires drilling for mountingSpecsModelDresserMounting PositionRearProduct NameFenderRiding StyleStreetTypeSmoothBase...

Drag Specialties - 14010630 - FENDER RR FLT 06-08FeaturesRaw steel constructionPre-drilled to accept all OEM componentsMounts with existing hardwareReplacement Part for OEM Number(s):5957906SpecsFor Wheel Size Imperial16''Base...

Drag Specialties - 14010595 - Front Fender - without Trim Holes - CustomFeaturesRaw stamped steel constructionMeasure approximately 6" W (inside)Mount with OE hardwareFenders with trim holes require lower fender skirtReplacement Part for OEM...

Drag Specialties - 14010334 - Rear Fender - XLFeaturesRaw steel finishPredrilled for OEM fender struts and license plate mountIncludes inner fender support and wire retention bracketsReplacement Part for OEM Number(s):5967499SpecsBase...

Drag Specialties - 14010332 - Rear Fender - XLFeaturesRaw steel finishPredrilled for OEM fender struts and license plate mountIncludes inner fender support and wire retention bracketsReplacement Part for OEM Number(s):5975697SpecsMounting...

Drag Specialties - 14010331 - Rear Fender - XLFeaturesRaw steel finishPredrilled for OEM fender struts and license plate mountIncludes inner fender support and wire retention bracketsReplacement Part for OEM Number(s):5967494ASpecsBase...

Drag Specialties - 14010328 - Custom Rear Fender - Raw - SteelFeaturesRaw steel constructionNot pre-drilled, requires custom mountingNo taillight or license plate mountMeasures approximately 30" L x 7-1/8" WSpecsColor/FinishUnfinishedMaterialSteelContour...

Drag Specialties - 14010327 - OE Rear Fender - Raw Steel - FXRFeaturesRaw steel finishPre-drilled for OEM fender struts, license plate mounts and taillightReplacement Part for OEM Number(s):5963481ASpecsMounting PositionRearRiding...

Russ Wernimont Designs - 380332 - Gambler Custom Rear Fender for Swingarm Frames - 7.25" W x 33.75" LFeaturesHeavy-gauge steel constructionSwingarm fender features wiring tubesEach fender is inspected individually to ensure straightness, consistency and...

Russ Wernimont Designs - 380309 - Custom Rear Fender for Rigid Frames - Left-Side Drive - 11" W x 36.5" LFeaturesHeavy-gauge steel constructionSwingarm fender features wiring tubesEach fender is inspected individually to ensure straightness, consistency...

Russ Wernimont Designs - 14010001 - Custom Front Fender - For 21" Wheel - Long OCF Style - 4.5" W x 38" LFeaturesHeavy-gauge steel constructionFenders are inspected individually to ensure straightness, consistency and a flawless finish with an absolute...

Arlen Ness - 210-040 - Pro Sport Front Fender - 21" - FLTFeaturesMade from premium 3k prepreg carbon fiberFeatures a custom dual window design for a unique lookDirect bolt-on fitment, does not require additional bracketsAllows clearance for up to 14”...

Saddlemen - EX000664B - Rear Fender Bra SetFeaturesBra set features SaddleHyde™ top with a soft under-liner prevents road debris and your passenger's boots from damaging the paintSpecsStylePlainTypeFenderColor/FinishBlackFeaturesPadded BackingMounting...

Saddlemen - T8100-13-D - Fender Chap - Matches Dominator Solo SeatFeaturesDecorative trim for solo seat installationContoured to fit fenderCovers marring of paint from pillion installationInstalls under solo seat and rear seat mount tabMatches Saddlemen...

Saddlemen - T8100-00-D - Fender Chap - Matches Dominator Solo SeatFeaturesDecorative trim for solo seat installationContoured to fit fenderCovers marring of paint from pillion installationInstalls under solo seat and rear seat mount tabMatches Saddlemen...

Saddlemen - T8700-97-D - Fender Chap - Matches Dominator Solo SeatFeaturesDecorative trim for solo seat installationContoured to fit fenderCovers marring of paint from pillion installationInstalls under solo seat and rear seat mount tabMatches Saddlemen...

Russ Wernimont Designs - RWD-50265 - EZ Custom Front Fender for 21" Wheel - 7.75" W x 42.5" LFeatures14-Gauge stamped steel constructionDirect bolt-on, no spacers requiredLS-2 style fenders follow the curvature of the wheel/tire and have a straight-cut...

Russ Wernimont Designs - RWD-50226 - Flat Back Dresser Front Fender - 5.5" x 21" - 30  - FLFeaturesHeavy-gauge, one-piece raw steel construction, ready to paintLaser trimmed to complement the rake of bikeRaw aluminum spacers are includedMade in the U.S.A...

Russ Wernimont Designs - RWD-50221 - Flat Back Dresser Front Fender - 26" - 44  - FLFeaturesHeavy-gauge, one-piece raw steel construction, ready to paintLaser trimmed to complement the rake of bikeRaw aluminum spacers are includedMade in the U.S.A...

Russ Wernimont Designs - RWD-50219 - Flat Back Dresser Front Fender - 26" - 42  - FLFeaturesHeavy-gauge, one-piece raw steel construction, ready to paintLaser trimmed to complement the rake of bikeRaw aluminum spacers are includedMade in the U.S.A...

Russ Wernimont Designs - RWD-50180-D - Custom Dresser Front Fender for 26" Wheel - Steel - LS-3 Style - 6" W x 48.75" LFeaturesHeavy-gauge steel constructionFenders are inspected individually to ensure straightness, consistency and a flawless finish with...

Russ Wernimont Designs - RWD-50183-D - Custom Dresser Front Fender for 26" Wheel - Steel - LS-3 Style - 6" W x 48.75" LFeaturesHeavy-gauge steel constructionFenders are inspected individually to ensure straightness, consistency and a flawless finish with...

Russ Wernimont Designs - RWD-50186-D - Custom Dresser Front Fender for 23" Wheel - Steel - LS-3 Style - 6" W x 45.375" LFeaturesHeavy-gauge steel constructionFenders are inspected individually to ensure straightness, consistency and a flawless finish...

Russ Wernimont Designs - RWD-50173 - Rear Fender - Steel - 7" W x 32-3/4" LFeatures14-gauge steel constructionFender mounting holes are pre-drilled, strut mounts, taillight and license mount are not pre-drilledDirect bolt-on designEasy to paintMade in...

Russ Wernimont Designs - RWD-50140 - LS-2 Custom Softail Front Fender - For 23" Wheels - 6" W x 45.5" LFeatures14-gauge steel constructionRaw easy-to-paint finishSimple, direct bolt-on installationMade in the U.S.A.SpecsRiding StyleStreetProduct...

Russ Wernimont Designs - RWD-CW4.5S - Short Flared Front Fender - For 90/90-21 Wheel 4.5" W x 33" LFeaturesBolts directly to Softail fender mounts (6-7/8" wide) with no spacer requiredPre-drilled, horizontal bolt patternMade in the U.S.A.Length given is...

Mustang - 78165 - Fender Bib - Smooth - Solo SeatFeaturesHook-and-loop and screw attachment utilize stock fender mountsPremium expanded black vinyl construction with braided edgingFelt-backed to protect paintMade in the U.S.A...

Mustang - 78056 - Fender Bib - Studded Chrome - Solo SeatFeaturesHook-and-loop and screw attachment utilize stock fender mountsPremium expanded black vinyl construction with braided edgingFelt-backed to protect paintMade in the U.S.A.SpecsLength...

Mustang - 78025 - Fender Bib - Smooth - Solo SeatFeaturesHook-and-loop and screw attachment utilize stock fender mountsPremium expanded black vinyl construction with braided edgingFelt-backed to protect paintMade in the U.S.A.SpecsProduct NameFender...

Klock Werks - KWF-01-0319 - Fender Slicer - 16"-19" - FLH/FLTRFeaturesLose the rivets and square edge lookStamped steel 14-gauge fender for smooth consistent finish13-Step E-coated factory-style finish resists corrosionLaser cut and pre-drilled for...

Klock Werks - KWF-02-0311 - Rear Fender - Vicla Frenched - 9" Extended Rear - BlackFeaturesStamped from 14-gauge steel using precision, deep-draw stamping technology that ensures a consistently smooth and flawless finish, minimizing bodyworkLaser cut...

Klock Werks - KWF-02-0310 - Rear Fender - Vicla Smooth - 9" Extended Rear - BlackFeaturesStamped from 14-gauge steel using precision, deep-draw stamping technology that ensures a consistently smooth and flawless finish, minimizing bodyworkLaser cut using...

Klock Werks - KWF-01-0309 - Front Fender - Henry Fit - 21"FeaturesStamped steel 14-gauge fender for a smooth consistent finish13-step E-coated factory-style finish for corrosion resistanceLaser cut, predrilled for a perfect fitExperienced increased...

Klock Werks - KWF-01-0101 - WFB™ Benchmark Front Fender - Steel - Black - 21"FeaturesStamped from 14-gauge U.S. steel, these 6-1/2" wide fenders are E-coated to prevent rust and corrosion with the lowest paint prep in the industryFenders are...

Klock Werks - KWF-03-0005 - Front Fender - T-Hat - Black - 19"FeaturesSteel fender is thick enough to add rigidity to the front end by acting like a fork brace, but can still be cut or shaped enough for an even more Kustom appearanceFenders come...

Klock Werks - KWF-03-0003 - Front Fender - Slicer - Black - 19"FeaturesSteel fender is thick enough to add rigidity to the front end by acting like a fork brace, but can still be cut or shaped enough for an even more Kustom appearanceFenders come...