Sportster Engine

Colony - Replacement Cylinder Stud Set fits '86-'22 Sportster Models (Except RH Sportster (OEM #16832-86A)) Features: Heat-treated for strength and durability Equal or surpass original equipment Fitment 2016-2019 Harley-Davidson 1200...

James Gaskets - James Rubber Rocker Box Gasket Kit W/ RCM Base Gaskets fits '86-'90 Sportster Models This kit comes complete with all of the necessary inner, upper and lower rocker box gaskets and bolt washers. Made in the U.S.A...

The XR Trackster Rocker Box Covers Make that Evolution Sportster look like a XR750 flat track racer Manufactured in die cast aluminum with CNC milled gasket surface Mounts in place of stock rocker box cover using stock hardware and gaskets; not...

The XR Trackster Rocker Box Covers Make that Evolution Sportster look like a XR750 flat track racer Manufactured in die cast aluminum with CNC milled gasket surface Mounts in place of stock rocker box cover using stock hardware and gaskets; not included...

Colony - 8107-16 Cadmium Cylinder Base Nuts and Washers fits '29-'52 WL, '57-'85 XL, '32-'73 G Models Cadmium stock cylinder base set includes 8 nuts & washers. Fitment: WL 1929-1952 XL 1957-1985 G 1932-1973

Rocker shaft end caps, chrome finish. Fits: FL 1971-1984 FX 1971-1984 FLT 1979-1983 FXR 1982-1983 XL 1971-1985

Chrome Pushrod Cover kit includes upper and lower pushrod covers, seals, springs. Fits: XL 1957-1979 Early 1979

Hex head bolt, chrome finish. Fits: XL 1957-1972

Harley Sportster Rocker box cover set with black finish. Fits: XL 2007-2012

James Gasket - Lower Rocker Cork fits '86-'03 Sportster Models (5-Pack) (OEM #17353-86) Features: Top quality Genuine James gaskets Made in the USA Fitment 1988-1990 Harley-Davidson Sportster 1200...

James Gasket - Upper Rocker Cork fits '86-'90 Sportster Models (5-Pack) (OEM #17354-86) Features: Top quality Genuine James gaskets Made in the USA Fitment 1988-1990 Harley-Davidson Sportster 1200...

James Gasket - Oil Pump Shaft Seal fits '68-'99 Big Twin Models (5-Pack) (OEM #26227-58) Features: Replacement Outer Oil Pump O-Ring Fitment 1999 Harley-Davidson Softail Night Train FXSTB - - 1998 Harley-Davidson Road King...

James Gasket - Motor Gasket Kit fits '86-'90 XL883, 1100 & 1200 (w/ MLS Head Gaskets (OEM #17026-86)) Features: Top-quality gaskets, oil seals, and o-rings necessary to rebuild an XL engine Made in the U.S.A. Note: Must order 1100 head...

James Gasket - Motor Gasket Kit fits '91-'03 Sportster Models (w/ MLS Head Gaskets (OEM #17026-91)) Features: Top-quality gaskets, oil seals, and o-rings necessary to rebuild an XL engine Made in the U.S.A...

James Gasket - Top End Gasket Kit fits '86-'90 Sportster Models (w/ MLS Head Gaskets (OEM #17032-86)) Features: Top-quality gaskets, oil seals and O-rings necessary to rebuild an engine Made in the USA Kit Includes: MLS Head Gaskets RCM...

James Gasket - Top End Gasket Kit fits '91-'03 Sportster Models (w/ MLS Head Gaskets (OEM #17032-91)) Features: Top-quality gaskets, oil seals and O-rings necessary to rebuild an engine Made in the USA Kit Includes: MLS Head...

James Gasket - Oil Pump Gasket/Seal Kit with DL-Style Gasket fits '91-'03 Sportster Models Features: Comes with new components that allow you to totally rebuild/rebush most oil pumps Made in the...

James Gasket - Intake Manifold Gasket Kit fits '66-'84 Shovelhead, '57-'78 Sportster Models w/ Bendix/​Keihin (Butterfly Style (OEM #27002-57)) Features: Kit contains carb-to-intake seal and two intake-to-cylinder head...

Jims - 5516 Sprocket Nut/Removal/Installation Socket Tool fits '91-'20 Sportster & Buell Models (Except Buell 1125R) Features: Ensures the mainshaft on Harley-Davidson® Sportster models extends through the guidance collar for correct...

Jims - 34623-83 Piston Pin Tool fits '84-'99 Big Twin (Except Twin Cam), '86-'03 Sportster Models Features: This tool will install “Round Circlip” rings in one easy step without distorting ring, for the safest wrist pin retention...

Jims - 34643-84 Valve Seal Installer for all Evolution Valve Guide Seals (OEM #34643-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...

Jims - 94805-57 Pinion Bushing Line Reamer fits '54-'99 Big Twin Models (Except Twin Cam) Features: Use on all Big Twin '54-'99 single cam only, (NOTE: Includes aftermarket motors, also XL '57 to early '84 idler gear bushing) Designed to line-ream...

Jims - 95970-32C Piston Pin Bush Tool fits '36-'99 Big Twin, '57-'20 Sportster & Buell Models (Except 1125R) Features: Use to remove and install wrist pin bushings without removing rods from crankcase Made in the U.S.A...

Jims - 97273-60 Camshaft Bearing Tool fits '57-'90 Sportster, '87-'90 Buell Models Features: Use to install inner cam bearings Made in the U.S.A. Fitment 1988-1990 Harley-Davidson Sportster 1200...

Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...

Drag Specialties - 3-1/4" Chrome Magnetic Ring Oil Filter With Nut fits '86-'22 Sportster (Except RH Sportster), 09-12 XR1200/X Models (OEM #63806-83, 63796-77A) Features: High-quality chrome spin-on-style oil filters Magnetic filters are designed...

Drag Specialties - 2-1/4" Chrome Magnetic Ring Oil Filter With Nut fits 'L82-'86 FX/FL, '80-'E85 Sportster Models (OEM #63782-80A, 63810-80) Features: High-quality chrome spin-on-style oil filters Magnetic filters are designed with a magnetic ring...

Drag Specialties - Oil Filter with Nut fits '86-'22 Sportster (Except RH Sportster), '09-'12 XR1200/X Models (OEM #63796-77A, 63805-80A, 63806-83) Features: High-quality spin-on filters are a dependable replacement for most Harley-Davidson...

Drag Specialties - Oil Filter with Nut fits '17-'24 M-Eight (Standard Capacity), '99-'17 Twin Cam Models (OEM #63731-99A, 63798-99) Features: High-quality spin-on filters are a dependable replacement for most Harley-Davidson models Includes a 17 mm...

Drag Specialties - Oil Filter with Nut fits 'L82-'84 FLH, 'L82-'86 FX/​FXWG, '80-'E84 Sportster Models (OEM #63782-80A, 63810-80) Features: High-quality spin-on filters are a dependable replacement for most Harley-Davidson models Includes a 17 mm...

Drag Specialties - Oil Filter fits '17-'24 M-Eight Model (High Capacity) (OEM #627002-96, 627002-97) Features: High-quality spin-on filters are a dependable replacement Fitment 2024 Harley-Davidson Road King Police...

Drag Specialties - Oil Filter with Nut fits '17-'24 M-Eight Model (High Capacity) (OEM #627002-96, 627002-97) Features: High-quality spin-on filters are a dependable replacement Note: Features a 17 mm hex nut on the end of the filter for easy...

Drag Specialties - Black Oil Filter fits '21-'24 RA1250/​1250S, RH 1250S, RH975/​975S Models (OEM #627002-80) Features: High-quality spin-on filter is a dependable replacement Fitment 2023-2024 Harley-Davidson Nightster Special...

Drag Specialties - Paper Oil Filter with Spring fits '65-'82 FX/FL, '57-'78 Sportster Models (OEM #63835-87T, 63837-92T, 6383940-53) Features: High-quality drop-in oil filter Fitment 1982 Harley-Davidson Super Glide II...

Drag Specialties - 2-1/4" Chrome Magnetic Ring Oil Filter fits 'L82-'86 FX/FL, '80-'E85 Sportster Models (OEM #63782-80A, 63810-80) Features: High-quality chrome spin-on-style oil filters Magnetic filters are designed with a magnetic ring in center...

Drag Specialties - 3-1/4" Chrome Magnetic Ring Oil Filter fits '86-'22 Sportster (Except RH Sportster), '09-'12 XR1200/X Models (OEM #63806-83, 63796-77A, 63805-80A) Features: High-quality chrome spin-on-style oil filters Magnetic filters are...

Drag Specialties - Paper Oil Filter fits '65-'82 FX/FL, '57-'78 Sportster Models (OEM #53839-59, 63840-53) Features: High-quality drop-in oil filter Fitment 1981-1982 Harley-Davidson Electra Glide Classic FLH - Notes: 1982Fits...

Drag Specialties - Oil Filter fits '86-'22 Sportster (Except RH Sportster), '09-'12 XR1200/X Models (OEM #63806-83, 63796-77A, 63805-80A) Features: High-quality spin-on filters are a dependable...

Drag Specialties - Oil Filter fits 'L82-'84 FLH, 'L82-'86 FX/​FXWG, '80-'E84 Sportster Models (OEM #63782-80A, 63810-80) Features: High-quality spin-on filters are a dependable replacement Fitment 1985 Harley-Davidson Fat Bob...

S&S Cycle - Stock Heads Intake Manifold O-Ring fits '84-'16 Big Twin, '86-'16 Sportster Models (OEM #26992-99, 26995-86A) Features: Sold Each Made from the highest-quality materials available Made in the USA Replacement Part for...