V-Twin

V-Twin - 35-0941 - Intake Manifold for 1-7/8 inch TypeDescriptionIntake Manifold for 1-7/8" type carburetor with O-ring type head. Fits:Custom applicationAdditional Information UOM1 - EA ...

V-Twin - 35-0940 - Linkert Carburetor Choke DiscDescriptionLinkert carburetor choke disc with large hole is for 1-1/2" and 1-1/4" bore linkerts, constructed of stainless steel.Large hole in bottom...

V-Twin - 35-0939 - inchL inch Series Carburetor Throttle ShaftDescriptionThrottle shaft "L" type is for S&S "L" series 1-7/8" carburetors. Fits:Replacement application for S&S "L" series...

V-Twin - 35-0937 - WR Conversion Intake Manifold KitDescriptionWR intake manifold kit includes intake manifold, nuts, brass seals and a Tedd Cycle patch. Manifold allows use of larger carburetor for...

V-Twin - 35-0934 - Carburetor Throttle Lever ArmDescriptionSingle cable throttle arm for S&S "B" with super bowl accelerator pump. Fits:Custom S&S "B" CarburetorsAdditional Information ...

V-Twin - 35-0930 - Nickel Plated Linkert Overhead Valve Carburetor ThrottleDescriptionNickel plated Overhead Valve linkert carburetor throttle lever. Lever is shown on M-5 linkert carburetor. Fits:EL...

V-Twin - 35-0929 - Cadmium Linkert Carburetor Throttle LeverDescriptionCadmium plated linkert carburetor throttle lever. Fits:W 1935-1948U 1937-1948Additional Information OEM No.1238-37C UOM1 - EA ...

V-Twin - 35-0928 - Nickel Plated Linkert Carburetor Throttle LeverDescriptionNickel plated linkert carburetor throttle lever. Fits:VL 1933-1936W 1934-1936Additional Information OEM No.1238-33 UOM1...

V-Twin - 35-0927 - Nickel Plated Linkert Carburetor Throttle LeverDescriptionNickel plated linkert carburetor throttle lever. Fits:W 1929-1933Additional Information OEM No.1238-29 UOM1 - EA ...

V-Twin - 35-0926 - Nickel Plated Linkert Carburetor Throttle LeverDescriptionNickel plated linkert carburetor throttle lever. Fits:J 1924-1933VL 1930-1932Additional Information OEM No.1238-24 UOM1...

V-Twin - 35-0925 - Linkert Carburetor Hardware KitDescriptionLinkert carburetor hardware kit includes complete screw assortment and nylon shaft bushing set. Fits:FL 1936-1965G 1936-1957EL 1936-1952W...

V-Twin - 35-0922 - Needle Valve LeverDescriptionNeedle valve lever with ball installed. Fits:FL 1941-1965U 1937-1948W 1937-1952EL 1936-1952Additional Information UOM1 - EA ManufacturerV-Twin ...

V-Twin - 35-0921 - 22mm OKO Hex Petcock PolishedDescriptionPolished OKO hex petcock includes 22mm hex nut for installation.Includes stainless steel screen. *NOTE: Spigot faces under the body for...

V-Twin - 35-0919 - Handlebar Throttle Screw KitDescriptionHandlebar throttle screw kit includes plastic knob, spring and retaining ring. Fits:XL 1974-2020FL 1974-1984FX 1974-1984FXST 1984-2015FXD...

V-Twin - 35-0918 - Linkert Carburetor Float Pin Cap SetDescriptionLinkert carburetor float pin cap set. Fits:WL 1933-1952UL 1937-1948FL 1941-1965EL 1936-1940VL 1933-1934Additional Information OEM No...

V-Twin - 35-0899 - Linkert Needle and SeatDescriptionLinkert needle and seat includes a brass seat and stainless steel needle.The thread on the needle and seat body measures 7/16"-24. Fits:FL...

V-Twin - 35-0897 - Linkert Needle, Seat and Brass Strainer SetDescriptionBrass gas strainer with screen, needle and seat.The seat fitting is included. *NOTE: Thread on needle seat is 1/8" NPT. Must...

V-Twin - 35-0896 - Accelerator Pump HousingDescriptionAccelerator pump housing features a diaphragm body with a ball and passage. Fits:XL 1976-1978 early 1978 modelsFL 1976-1978 early 1978 modelsFLST...

V-Twin - 35-0893 - XL 47mm OKO Shorty Carburetor Kit AlloyDescriptionKit includes an alloy 47mm shorty OKO carburetor, push-pull cable type, one piece manifold, with mount flanges and a round mesh...

V-Twin - 35-0892 - 1/4 inch Turn Throttle KitDescription1/4" turn throttle kit includes a 60" cable, hillclimber grip set and a 1" handlebar throttle assembly. Fits:FL 1976-1996XL 1976-1996FX...

V-Twin - 35-0890 - CV Carburetor Choke Cable Mount Stainless SteelDescriptionCV carburetor choke cable mount features a stainless steel finish. Fits:FX 1993-2006XL 1988-2006Additional Information ...

V-Twin - 35-0889 - XL Intake Flange KitDescriptionXL intake flange kit includes two zinc plated intake flanges, two intake manifold seals and four allen screws, for EFI 2007-up XL applications...

V-Twin - 35-0888 - 47mm OKO Shorty Carburetor Kit AlloyDescriptionAlloy peformance 1-7/8" shorty carburetor kit will accept S&S bolt pattern air filter assemblies. It has a relocated accelerator pump...

V-Twin - 35-0887 - Linkert to CV Carburetor AdapterDescriptionThis carburetor adapter is machined from billet stock with a natural finish. Allows the installation of the 40mm CV carburetor 4 bolt...

V-Twin - 35-0886 - Fuel Strainer Filter NickelDescriptionFuel strainer features a nickel finish over a machined red brass.Nickel fuel strainer is specifically for 1936-1937 M-5 linkert carburetors...

V-Twin - 35-0884 - Linkert Carburetor VenturiDescriptionThis Venturi will downsize the 4-bolt M-74 1-1/2" brass Linkert carburetor so that it can be used on a flathead model that originally had a...

V-Twin - 35-0883 - Zicad Left Side PetcockDescriptionLeft side petcock features 3/8"-18 National Pipe Thread, the body is machined from brass and the handle is steel, and has a zicad finish.*NOTE:...

V-Twin - 35-0881 - Zicad Right Side PetcockDescriptionZicad right side petcock features 1/8"-27 NPT on the side fitting the gas tank and 1/2"-24 NPT on fuel line connection side. Petcock is machined...

V-Twin - 35-0879 - Copper Fuel Strainer without ScreenDescriptionFuel strainer is machined from copper that features a natural finish.The inlet and outlet fittings are 7/16" x 20 TPI. The nut is...

V-Twin - 35-0873 - Linkert Carburetor Overhaul KitDescription18pc Linkert carburetor overhaul kit for 3-bolt linkerts with 1-1/4" throat. Kit includes black float, bushings, springs, float pin,...

V-Twin - 35-0870 - OKO Performance 1-7/8 inch Shorty Carburetor KitDescriptionKit includes a chrome billet carburetor bracket kit, which features an integral breather passage to air intake, and a...

V-Twin - 35-0868 - 1/4 NPT-22MM Petcock Adapter NutDescriptionBrass Petcock adapter nut is for connecting 1/4" NPT petcock to 22mm petcock on male fuel tank set. To use with S&S and OKO carburetor...

V-Twin - 35-0867 - Oversize Carburetor Throttle DiscDescriptionLinkert 1-1/2" carburetor throttle disc is standard size with correct bevel and #9-x marking.Throttle disc is not perfectly round, it...

V-Twin - 35-0866 - Linkert Carburetor Throttle Lever CadmiumDescriptionLinkert carburetor throttle lever is constructed of investment cast steel and has a cadmium plated finish. Fits:WL 1937-1952UL...

V-Twin - 35-0863 - Intake Manifold Nut and Seal KitDescriptionParkerized intake manifold nuts with brass seals.Note: For use with a 3-bolt 61" manifold on large port knuckleheads. ...

V-Twin - 35-0862 - Oversize Carburetor Throttle DiscDescriptionLinkert 1-1/2" carburetor throttle disc is .030 oversize with correct bevel.Throttle disc is not perfectly round, it has more of a...

V-Twin - 35-0861 - Oversize Carburetor #12 Throttle DiscDescriptionLinkert 1-1/2" carburetor throttle disc is .025" oversize with correct bevel. Fits:FL 1940-1950FL 1952 61" OHVAdditional...

V-Twin - 35-0860 - Oversize Carburetor Throttle Disc for 1-1/4 CarburetorDescriptionCarburetor throttle disc is .025 oversize. Used for 1-1/4" carburetor that requires an oversized throttle disc due...

V-Twin - 35-0853 - Linkert Carburetor Bowl Zinc Lock NutDescriptionLinkert carburetor bowl lock nut has a zinc finish. 4-piece kit includes large nut with stud, lock washer lock nut, and copper...

V-Twin - 35-0852 - Keihin Carburetor Heavy Duty Diaphragm PumpDescriptionHeavy duty Keihin carburetor diaphragm pump.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FL 1985-1989FX...