V-Twin

V-Twin - 35-0296 - Keihin Carburetor Slow JetDescriptionKeihin carburetor slow jet is .72mm.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLT...

V-Twin - 35-0295 - Keihin Carburetor Slow JetDescriptionKeihin carburetor slow jet is .75mm. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT 1979-1989Additional...

V-Twin - 35-0294 - Keihin Carburetor Slow JetDescriptionKeihin carburetor slow jet is .68mm.Sold as a pack of 5. Fits:FL 1976-1984XL 1976-1989FXST 1984-1989FXR 1982-1984FX 1976-1984FLST 1986-1989FLT...

V-Twin - 35-0292 - OKO 47mm Shorty Carburetor Kit AlloyDescriptionPerformance 47mm shorty caburetor with an alloy finish. Kit will accept S&S bolt pattern air filter assemblies. It has a relocated...

V-Twin - 35-0291 - Viton Shut-Off Rod Tip OnlyDescriptionViton tip for fuel petcock shutoff rod.This is the replacement tip for rods fitted with tips. ...

V-Twin - 35-0290 - Super B Carburetor Body Rebuild KitDescriptionCarburetor body rebuild kit for S&S Super B carburetor includes jets, throttle shaft with spring, extended float bowl screws, float,...

V-Twin - 35-0286 - WR Linkert Intake ManifoldDescriptionFour bolt WR intake manifold for Linkert carburetor is cast iron with zinc plating.NOTE: For WR and K use, order correct manifold nuts and...

V-Twin - 35-0284 - Replica Linkert Carburetor Cork FloatDescriptionReplica Linkert carburetor cork float includes shoulder bolt and screw.This cork float manufactured to OEM specifications and helps...

V-Twin - 35-0282 - 45 inch WL Cast Iron Intake ManifoldDescription45" WL cast iron intake manifold in a zinc finish is the 3 bolt replacement type for brass Linkert carburetors.*NOTE: Nuts and brass...

V-Twin - 35-0281 - Side Valve Linkert Carburetor Bean Pot BowlDescriptionLinkert carburetor bean pot bowl with early style hex cap features a natural aluminum finish. Bean pot bowl shape allows...

V-Twin - 35-0279 - 1-7/8 inch Intake ManifoldDescriptionNatural alloy cast 1-7/8" intake manifold is the flat seal type and can be used as a stock replacement on OKO and S&S "E" Carburetors.Machined...

V-Twin - 35-0278 - Twist Grip Kit with CablesDescriptionTwist grip kit with 2 stock length black cables, is the push-pull type for Keihin butterfly and CV type carburetors and includes a twist...

V-Twin - 35-0277 - Twist Grip Kit with CablesDescriptionTwist grip kit with 2 stock length black cables, is the push-pull type for Keihin butterfly and CV type carburetors and includes a twist...

V-Twin - 35-0275 - Tillotson Master Carburetor Components KitDescriptionTillotson carburetor parts kit includes the fuel inlet, adjustable needle kit, tickler kit, idle mixture screw, base pump,...

V-Twin - 35-0271 - 3 Bolt Linkert Carburetor Adapter KitDescriptionLinkert 38mm carburetor adapter kit includes a three bolt adapter, intake manifold rubber adapter, and two stainless steel hose...

V-Twin - 35-0268 - Deluxe Tillotson Carburetor Gasket and Hardware KitDescriptionDeluxe Tillotson carburetor gasket and hardware kit includes a gasket, diaphragm, idle and intermediate adjuster screw...

V-Twin - 35-0266 - 1 inch Twist Grip Assembly BlackDescription1" throttle handle with Anderson type grips features black throttle housing.Cable not included. Fits:Custom applicationAdditional...

V-Twin - 35-0263 - Linkert M88 Carburetor Parts KitDescriptionLinkert M88 carburetor parts kit includes all components, except the brass body and throttle arm.WL and WLA must be fitted with aluminum...

V-Twin - 35-0259 - 42/45 Flat Side Carburetor Float Bowl Speed Screw Set ChromeDescriptionChrome CV carburetor float flat side bowl speed screw set. For Mikuni and OKO 42mm and 45mm flat side...

V-Twin - 35-0255 - Wyatt Gatling Billet Handlebar Throttle Cable HousingDescriptionWyatt Gatling billet handlebar throttle cable housing accepts a 1982-1995 throttle cable, and is for single cable...

V-Twin - 35-0254 - Chrome Handlebar Throttle Clamp and Tube SetDescriptionChrome handlebar throttle clamp and tube set is for dual cable applications. Fits:FXR 1982-1994FXST 1984-1995FX 1982-1984FL...

V-Twin - 35-0250 - Copper Linkert Carburetor Float Bowl CapDescriptionCopper Linkert carburetor float bowl cap with 9/16 - 20 thread includes sealing washer.For use with Linkert carburetor float bowl...

V-Twin - 35-0246 - Crossover Hose SealsDescriptionCrossover hose seals. Fits:Replacement applicationAdditional Information OEM No.63785-00 UOM10 - PK ManufacturerV-Twin OriginImported 2025...

V-Twin - 35-0244 - Braided Steel Crossover Fuel LineDescriptionBraided steel crossover fuel line includes chrome ends and seals. Fits:FLST 1986-1999FXST 1986-1999Additional Information OEM No...

V-Twin - 35-0240 - Genuine Keihin Carburetor Rebuild KitDescriptionGenuine Keihin carburetor rebuild kit contains needle, proper O-rings, and diaphragm. Fits:FXR 1982-1982FX 1976-1982FL 1976-1982XL...

V-Twin - 35-0237 - Dual Handlebar Throttle Handle and GripsDescriptionDual handlebar throttle handle with grips. Grips are without chrome end plugs. Fits:FLT 1979-1995FXR 1982-1994FXST 1984-1995FLST...

V-Twin - 35-0235 - Shorty Carburetor Insulator BlockDescriptionShorty carburetor insulator block. Insulator is Phenolic and includes O-ring.*NOTE: For 1-7/8" OKO and S&S "E" shorty carburetors...

V-Twin - 35-0232 - Single Handlebar Throttle AssemblyDescriptionSingle cable handlebar throttle assembly without grips is for 1" bars with a metal twist tube. Fits:Custom applicationAdditional...

V-Twin - 35-0230 - Carburetor Vacuum PistonDescriptionCV carburetor vacuum piston operates the needle up and down to regulate the fuel in the air stream.This vacuum piston is manufactured to meet OEM...

V-Twin - 35-0226 - Carburetor Needle and SeatDescriptionTillotson carburetor needle and seat. Fits:FL 1966-1970XL 1966-1971Additional Information OEM No.27588-66 UOM1 - EA ManufacturerV-Twin ...

V-Twin - 35-0224 - Carburetor Intermediate Adjuster ScrewDescriptionTillotson intermediate carburetor adjuster screw. Fits:FL 1966-1970XL 1966-1971Additional Information OEM No.27352-66 UOM1 - EA ...

V-Twin - 35-0222 - Petcock with Male ThreadDescriptionFuel valve petcock with male threads includes the nut and 2 screens, featuring a black body with a zinc plated lever and cover plate.For 1340cc...

V-Twin - 35-0220 - Carburetor Idle ScrewDescriptionKeihin and CV carburetor idle screw allows for easier adjustment by hand. Fits:FL 1976-1984FXD 1991-2017FX 1971-1984XL 1976-UPFLST 1986-2017FXST...

V-Twin - 35-0217 - Accelerator Pump Adjuster Screw SetDescriptionCarburetor accelerator pump adjuster screw set is "T" style. Fits:Replacement application for S&S Super E and G carburetorAdditional...

V-Twin - 35-0216 - 3 Bolt Linkert Carburetor Adapter KitDescriptionLinkert 34mm carburetor adapter kit includes a three bolt adapter, intake manifold rubber sleeve, and two stainless steel hose...

V-Twin - 35-0209 - Zinc Fuel Strainer FilterDescriptionFuel strainer filter has a zinc finish.Order screen separately. Fits:FL 1942-1949Additional Information OEM No.62250-41 UOM1 - EA ...

V-Twin - 35-0208 - Chrome Carburetor Cable Support BracketDescriptionBendix chrome carburetor cable support bracket. Fits:Custom application for Bendix carburetorAdditional Information OEM No...

V-Twin - 35-0207 - Replica Carburetor Cable Block KitDescriptionCarburetor cable block kit includes screws, washer, and cotter pin.Block and cotter pin are stainless steel and screw and washer are...

V-Twin - 35-0203 - Bendix Carburetor Accelerator PumpDescriptionBendix carburetor accelerator pump*NOTE: The ridged area is constructed of rubber and features a leather seat. Fits:XL 1972-1976FX...

V-Twin - 35-0202 - Adjustable Main Jet Conversion KitDescriptionAdjustable main jet conversion kit is for Bendix carburetors .The thumb screw adjustment makes tuning a 5 minute cinch. Fits:Custom...