Yamaha XS 650 Parts

Motorcycle Supply Co Speeder Turn Signals The Speeders are available with Red, Amber or Smoked Lens. Features: The mounting stud is 1" long, requires slightly larger than 3/8" hole to mount. Cast Aluminum The Speeder Turn Signals are also...

Motorcycle Supply Co Chrome 4.5" Headlight - Clear Lens Specs: Bates Style Headlamp. Clear Lens. Chrome Housing. 3 Wire High/ Low Beam. Fitment: Custom Applications

TC Bros. Choppers universal fit, weld-on fender mounting bracket is constructed from a single piece of 1/4" thick American made mild steel for easy welding. Vintage style curves and contours provide eye appeal while the 5/16" diameter mounting holes...

Motorcycle Supply Co. Unity Style 5" Matte Black Headlight - Clear Lens Specs: Matte Black Housing. 3 Wire High/ Low Beam. 5" Wide, 4" Deep. Fitment: Custom Applications

V-Twin - Invader Grilled Tail Light Assembly This Invader Grilled tail lamp has a red lens and chromed housing. Dimensions: Center to center of bracket holes 4"-3/8 4" wide 5" tall Fitment: Custom Applications

Motorcycle Supply Co Black 4.5" Headlight with clear lens. Specs: Bates Style Headlamp. 12V H4 Bulb. Black Housing. 3 Wire High/ Low Beam. Fitment: Custom Applications

 All Balls Racing Rear Wheel Bearing Kit fits: Yamaha XS650 '70-'83 Features: High-speed bearings are manufactured to ABEC 3 precision levels Triple-lip rubber seals keep the grease in and the water and dirt out Chevron SRI 2 grease contains rust...

V-Twin Saga Gas Tank 3 Gallon - Bung Style Features: right side petcock opening. dished teardrop pop out sides fuel capacity of 3.0 gallons. uses a bung style cap which is not included. End to end of mounting tabs measures 19-7/8 Accepts 3/8"...

V-Twin Fat Bob Steel Rear Fender - Right Side Chain Relief Bobbed rear fender for rigid models has a raw finish with a right side relief for the chain (right side of the bike while on the bike facing handlebars). Measurements: 7-1/4" wide and 5-1/5"...

V-Twin Steel Rear Fender 6" Round Profile - Raw Smooth round profile chopper fender has a thickness of 1.05 mm. Fits: Custom application

TC Bros Choppers - Stop Bobber Tail Light License Plate Bracket TC Bros unique modular design allows the license plate to be mounted horizontally or vertically on either the left or right side of the bike by bolting it together using the pre cut...

V-Twin Marker Lamp Set with Red Lens Single Stem Black V-Twin is a well-known, reputable brand. They sell quality parts like this one, at a reasonable price. Available in black with a red lens, this low profile lamp set is just what you need for you...

V-Twin Stop Fender Mount Tail Light - Chrome Standard Bulb Stop tail lamp with 12 volt bulb, for fender mounting. Fitment: Custom Application

V-Twin Rear Fender Brace Set for Rigid - Chrome Mount brace set allows any width fender to be bolted to these bars. Fender brace is for rigid frames. Features:   Set of two Braces are 9-1/2" long chrome finish Mount holes measure 5/16" in...

V-Twin Rear Fender Brace Set for Rigid - Raw This allows any width rear fender to be mounted to this brace set. Features: Fender brace is for rigid frames. Set of two. Braces are 9-1/2" long with raw finish. Mount holes measure 5/16" in diameter...

V-Twin Smooth Solo Seat - Thick Bates style solo seat made of black vinyl. Center to center measurement on spring mount studs for front is 4-1/4" and for rear is 7-1/8". Measurements: Length: 12-1/2" Back Width: 9-1/2" Thickness: 4cm Middle...

V-Twin Steel Rear Fender - 5" Round Profile Raw for Bobber/Chopper Round profile chopper fender is a round British style without rib. Fits Custom Applications Dimensions: Surface Length: 38" Tip To Tip: 29" Outside Width: 5-1/5" Please...

Universal fender strut kit for choppers and bobbers. Kit includes: 4 CNC Machined steel bungs with 3/8-16 threaded hole and two 12" long 1/2" diameter steel rods.   Everything is made from 1018 mild steel for easy welding!

Biltwell - Recoil Grips for 7/8 Inch Handlebars Biltwell's Recoil Grips are made from Krayton rubber, that's the same stuff the BMX and Dirtbike grips you grew up with are made of. These grips will wear quicker than a conventional handlebar grip...

V-Twin Round LED Tail Light - Chrome w/ Red Lens Features: LED round tail lamp is chrome with red lens includes a 2 bolt adjustable base mount. Tail lamp measures 2-1/4" in diameter and 2.204" long.  Does not have license plate light...

V-Twin Round LED Tail Light - Black w/ Smoked Lens This round LED tail lamp is black with a smoked lens. It comes from V-Twin so you know it's made from quality products. Not only is the construction of this durable but it is accompanied by an LED light...

V-Twin Round Rear Fender - 6" Features: Round profile chopper/ bobber raw fender is 6" wide and ribbed type with center bead. Made from .032" thick steel Specs: Length Tip to Tip: 27-1/2" Width: 6" Thickness: .9mm

TC Bros Choppers 33 Ford Replica Black Tail Light License Plate Bracket TC Bros unique modular design allows the license plate to be mounted horizontally or vertically on either the left or right side of the bike by bolting it together using the pre cut...

Invader Black Turn Signals Standard Bulb with Amber Lens Features: Dimensions - 2-3/4" length, 1-5/8" width. The mounting stuf id 5/8" long, requires slightly larger than 3/8" hole to mount. This is not LED, it has a standard 12v bulb. Cast...

V-Twin 4" Headlight - Chrome w/ Clear Lens Features: Chrome 4" bottom mount deco headlamp features a longer tapered shell with a 12 volt 60/55 watt H-4 bulb. Includes mount block and stud. Headlamp does not have a hi-beam indicator...

TC Bros Choppers Yamaha XS650 Headlight Bracket Fits '74-'83 Models This bracket is designed to work with most aftermarket/custom headlights. Kit comes with metric mounting hardware. Bracket bolts directly to your stock triple clamp. Fits 74-83 models...

TC Bros Choppers Two Inch Round Bobber Tail Light License Plate Bracket TC Bros unique modular design allows the license plate to be mounted horizontally or vertically on either the left or right side of the bike by bolting it together using the pre cut...

TC Bros. Side Mount License Plate/Tail Light Bracket TC Bros. Choppers unique modular design allows the license plate to be mounted vertically or horizontally on either the right or the left side of the bike by bolting it together using the pre cut...

Universal Linkage Kit for all TC Bros Choppers forward control and rearset kits. The rods and tubes will need to be cut to fit your own application. KIT INCLUDES: Two 24'' Long 5/16" Threaded Rods Four 5/16" Ball Joints Two 5/16" ID x 1/2" OD...

TC Bros. Choppers brake anchor rod is designed specifically for the Yamaha XS650 but will work with many different models. Length is adjustable from 9.5 inches to 10.25 inches center to center of rod ends. Kit includes: Brake anchor rod Mild steel...

TC Bros Choppers - 33 Ford Replica Tail Light License Plate Bracket This is the most versatile bracket on the market! Unique modular design allows bracket to be mounted horizontally or vertically on either the left or right side of the bike. 3...

V-Twin LED Tail Light - Chrome w/ Smoked Lens Features: LED round tail lamp is chrome with smoked lens includes a 2 bolt adjustable base mount. Tail lamp measures 2-1/4" in diameter and 2.204" long.  Does not have license plate light...

V-Twin LED Tail Light - Chrome w/ Red Lens LED round tail lamp is chrome with red lens includes a 2 bolt adjustable base mount. Tail lamp measures 2-1/4" in diameter and 2.204" long. Does not have license plate light provisions. Fitment: Custom...

V-Twin LED Tail Light - Black w/ Red Lens This round LED tail lamp is black with a red lens. It comes from V-Twin so you know it's made from quality products. Not only is the construction of this durable but it is accompanied by an LED light which are...

V-Twin Round LED Tail Light - Black w/ Red Len This Bates Style LED tail lamp features a black housing with a red plastic lens. Features: LED round tail lamp is black with red lens includes a 2 bolt adjustable base mount. Tail lamp measures 2-1/4"...

V-Twin Sparto Tail Light 12V - Chrome This is a Chrome die cast Sparto lamp with gasket for fender mounting. Fitment: Custom application

V-Twin Shooter Tail Light Std Bulb - Brass Anodized This Motorcycle Shooter Taillight is Brass Anodized with a Standard Bulb and Bobber Style design. Note: This is not Brass, it is Aluminum. The Brass color is from brass color anodizing. Unlike Brass...

V-Twin Axed Alien Gas Tank - 2.2 Gallon - Dual Cap This V-Twin Gas Tank has a left side 1/4" NPT Petcock opening. It features a fuel capacity of 2.2 gallons. The tank uses a Bayonet Style Gas Cap, and has front and rear mount tabs. This gas tank works...

V-Twin Axed Alien Gas Tank - 2.2 Gallon This V-Twin Gas Tank has a right side 1/4" NPT Petcock opening. It features a fuel capacity of 2.2 gallons. The tank uses a Bayonet Style Gas Cap, and has front and rear mount tabs. This gas tank works great on...

Biltwell - Solo Seat Black Diamond Fitment: This is a custom motorcycle component that requires basic fabrication skills and mechanical acumen to install properly. If your motorcycle already has a seat hinge and spring bungs installed on the frame,...