1968

Colony - Gas Tank Restoration Spacers fits Universal Sportster Washers (OEM #61135-52) Features: OEM replacement spacers Fitment 2018-2020 Harley-Davidson Iron 1200 XLNS - - 2018-2019 Harley-Davidson Forty-Eight Special...

The Accutronix Custom Grips are a great final touch to your custom bike build. High-quality brass construction Dual cable design Sold in pairs Made in the U.S.A. Fitment: YearMakeModel 2016 - 2017 Harley-Davidson Breakout (EFI)...

Wild 1 Chubby Flatline 12" Handlebars Features: 1-1/4" diameter Drilled for internal wiring Chrome Made in USA Measurements: 12" TALL 24" WIDE FLAT 0" PULL BACK 0° WRIST ANGLE

Wild 1 Physco Street Fighter 14" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

Wild 1 Physco Street Fighter 10" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

Sifton - 1/4" NPT Brass Petcock Sifton petcock with 1/4" National Pipe Thread accepts 5/16" fuel line. Knurled knob turns on-off. Does not include reserve feature. Petcock accepts 1/4 or 5/16" fuel line. These fuel line does not rotate as gas is...

Colony - 2665-18 Cadmium Rear Fender Mount Kit fits '59-'78 Sportster Models (OEM #8881-18) Features: Kit includes two 3/8"-24 bolts, four 5/16"-24 screws, four 5/16"-24 nuts, two 3/8"-24 nuts, four 5/16" lockwashers, and two 3/8" lock washers Made...

Colony - 2373-1 Upper Chrome Fork Tube Cap fits '71-'72 FX & '52-'72 Sportster Models (OEM #45756-59) - Flat Top Features: Made in the U.S.A. Fitment 1972 Harley-Davidson Sportster 1000...

Colony - 8161-4 Rear Axle Nut Kit fits '46-'71 Big Twin & '57-'72 Sportster Models (OEM #41596-30, 41603-32) - Cadium-Plated Features: Kits include axle nut, sleeve nut, cotter pin and axle nut washer for 3/4" axles Quality reproduction of...

V-Twin - Replica Exhaust Header Pipe fits '57-'68 Sportster Model Replica chrome header pipe feature a 2 into 1 design. This pipe is one piece Fitment: XL 1957-1968

V-Twin - 16" x 4" Rear Spoke Wheel fits '54-'56 K, '57-'78 Sportster Models Rear wheel assembly features a 40 hole 16" x 4" chrome rim, 40 chrome spokes and a rear hub with bearings installed. Wheel is laced and tured. Accepts a 130-140 tire size...

Colony - Cylinder Base XLR Type Nut fits '57-'84 Sportster Models Features: For use on specific applications Made in the U.S.A. Fitment 1983-1985 Harley-Davidson Sportster 1000 XLX - - 1983-1984 Harley-Davidson Sportster 1000...

Colony - Acorn Cylinder Base Hardware Kit fits '57-'85 Sportster Models Features: Individual acorn bolt and nut sets for specific applications Made in the U.S.A. Fitment 1983-1985 Harley-Davidson Sportster 1000...

Colony - Head Bolt Kit fits '57-'72 Sportster Models (OEM #4714W) Features: Hardened to OEM specifications to prevent stretching Made in the U.S.A. Fitment 1972 Harley-Davidson Sportster 1000 XLH - - 1972 Harley-Davidson Sportster 1000 XLCH - - ...

Colony - Magneto Ground Terminal Assembly for '58-'69 XLCH Features: Magneto ground terminal assembly Fitment: 1958-1969 Harley-Davidson Sportster 900 XLCH - -

Colony - 8881-18 Chrome Rear Fender Mount Kit fits '59-'78 Sportster Models (OEM #2272, 4362) Features: Kit includes two 3/8"-24 bolts, four 5/16"-24 screws, four 5/16"-24 nuts, two 3/8"-24 nuts, four 5/16" lockwashers, and two 3/8" lock...

Colony - 9899-1 Cadmium Spring Stud Starter fits '52-'70 Sportster Models (OEM #33088-52) Features: Quality reproduction of the original part Made in the U.S.A. Fitment 1958-1970 Harley-Davidson Sportster 900...

Colony - Tachometer Drive Block-Off Plug fits '57-'80 Sportster Models Features: Chrome-plated block-off plug for use when the stock mechanical tachometer is discarded Includes a nylon washer Made in the U.S.A. Fitment 1979-1980 Harley-Davidson...

Drag Specialties - 54" Black Vinyl High-Efficiency Clutch Cable fits '68-'86 Big Twin Models (4-Speed) - Alternative Length Features: Cables feature chrome fittings, black vinyl outer casings, tempered-steel inner wire and a nylon inner sleeve for...

DP - High-Performance Friction Clutch Plates fits '57-'70 Sportster Models (Repl. OEM #s 37985-52A & 37985-57) The DP High-Performance Friction Clutch Plates have DP's exclusive high-heat friction materials for fade-free performance. Qty. Included:...

Wild 1 - Chubby® Savage 1-¼" Handlebars - Black These handlebars from Wild 1 are 1-1/4" in diameter, they are also 1-1/4" at the clamp and will need to be ran with 1-1/4" risers, such as the ones offered by Wild 1. Features Handlebars are...

V-Twin Roadster 3.5gal Gas Tank for Harley XL 1952-1978 Replaces Harley-Davidson part number 61006-57. Description: Replica gas tank has a right side petcock location, and fuel capacity of 3.5 gallons. Check the tank for flaws and fit before...

Colony - 2144-1 Aluminum Primary Cover Filler Caps fits '54-'70 Sportster Models (OEM #34742-52A) Features Chrome or raw aluminum finish Made in the U.S.A. Fitment YearMakeModel 1958 - 1970 Harley-Davidson Sportster 900...

James Gasket - Primary Cover Gasket fits '67-'76 Sportster Models (OEM #34955-67, 34955-67A) Features: Top quality gaskets, seals and O-rings meet or exceed OEM specifications Primary gasket features silicone beading Made in the...

James Gasket - Intake/Carburetor Gasket Kit fits '66-'84 Shovelhead, '79-'85 Sportster Models w/ Bendix/Keihin/​Tillotson (Butterfly Style) Features: Kit contains carb-to-intake seal and two intake-to-cylinder head...

James Gasket - Tail Lamp Gasket Kit fits '57-'72 lens (OEM #68123-55) Features: Top-quality replacement gaskets Fitment 1972 Harley-Davidson Sportster 1000 XLH - - 1972 Harley-Davidson Sportster 1000...

James Gasket - Intake Manifold Gasket Kit fits '66-'84 Shovelhead, '57-'78 Sportster Models w/ Bendix/​Keihin (Butterfly Style (OEM #27002-57)) Features: Kit contains carb-to-intake seal and two intake-to-cylinder head...

James Gasket - Top End Gasket Kit fits '57-'71 Sportster (OEM #17030-57) Features: Top-quality gaskets, oil seals and O-rings necessary to rebuild an engine Available as complete sets or top-end sets only Made in the...

James Gasket - Complete Motor Gasket Kit fits '57-'71 XLH, XLCH Models (OEM #17026-71) Features: Top-quality gaskets, oil seals and O-rings necessary to rebuild an engine Available as complete sets or top-end sets only Made in the...

Jims - 1168 Primary Cover Inspection Plug Tool fits '57-'90 Sportster Models Features: Use this tool to remove and install primary inspection plug Made in the USA

Jims - 2244 3/8" 35 mm Fork Nut Socket fits For Big Twin & Sportster Models Features: Used to remove and install top fork nuts on fork tubes Rubber protector inside socket Will clear most handlebars Made in the U.S.A...

Jims - 2240 Head Holder Guide Tool '48-'04 Big Twin, '57-'03 Sportster & Some SE CVO Twin Cam Models (5/16” Valve Guides) Features: Adapters are supported by a stand that makes it easy to press valve guides in and out A special guide...

Jims - 95760-57 Bushing Bearing Puller fits '66-'17 Big Twin (Except M-Eight), '57-'22 Sportster & Buell Models (Except 1125R) Features: Used to remove rocker bushing or bearing in one easy operation Made in the U.S.A...

Jims - 2234 Primary Drive Lock Tool fits '70-'06 Big Twin & '86-'22 Sportster Models Features: Use on all primaries between front primary chain and motor sprocket Made in the U.S.A. Fitment 2016-2017 Harley-Davidson 1200 Roadster...

Jims - 94805-57 Pinion Bushing Line Reamer fits '54-'99 Big Twin Models (Except Twin Cam) Features: Use on all Big Twin '54-'99 single cam only, (NOTE: Includes aftermarket motors, also XL '57 to early '84 idler gear bushing) Designed to line-ream...

Jims - 95724-57 Tappet Guide Puller Tool fits '57-'85 Sportster Models Features: Used to remove press-fit tappet guides from crankcase Made in the U.S.A. Fitment 1983-1985 Harley-Davidson Sportster 1000...

Jims - 2232 Bearing Race Tool fits '84-'17 Big Twin (Except '14-'17 Dressers), '86-'22 Sportster & '94-'02 Buell OEM Frames (Will Also Work on Most Aftermarket Frames) Features: Removes and installs steering head bearing race on 84-16 Big Twin...

Jims - 97273-60 Camshaft Bearing Tool fits '57-'90 Sportster, '87-'90 Buell Models Features: Use to install inner cam bearings Made in the U.S.A. Fitment 1988-1990 Harley-Davidson Sportster 1200...

Jims - 97081-54 Sprocket Shaft Bearing Press Tool fits '55-'76 Sportster Models Features: Use on '55-'76 XL and K models to install the flywheel assembly into the left crankcase Timken® bearing Optional sleeves sold separately for use on '86-'03...

Jims - 1017-37TB Cam Bushing Installer fits '37-'48 Big Twin Side-Valve Motors, '54-'20 Sportster, '91-'09 Buell Models (Except 1125R) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit...