FXR Clutch, Driveline & Trans

Jims - 39361-69 Sprocket Shaft Seal Installation Tool fits '69-'10 Big Twin & Twin Cam Models Features: Designed to press oil seal over sprocket shaft into case Made in the U.S.A. Fitment 2010 Harley-Davidson Street Glide Trike...

Jims - 34902-84 Mainshaft Bearing Race Tool fits 'L84-'20 Big Twin Models Features: Used to remove and install the inner bearing race on the transmission mainshaft Made in the U.S.A. Fitment 2016-2017 Harley-Davidson Fat Boy S...

Jims - 34734-80 Main Drive Gear Bearing/Seal Installer Tool fits '80-'90 5-Speed Big Twin Models Features: Holds bearings and seal square to its bore, eliminating any marring Install both bearings and seal with use of a one-ton press Install...

Jims - 97225-55 Sprocket Shift Bearing Installation Tool fits '55-'02 Big Twin Models Features: Used on '84-'02 Big Twin to install the flywheel assembly to the left crankcase Timken® bearing Made in the U.S.A...

Jims - 94660-37A Counter Shaft Sprocket Locknut Wrench fits '36-'06 Big Twin Models (Except '06 Dyna) Features: Removes hex nut from end of main drive gear that secures the rear drive transmission pulley Extra-long two-piece design Made in the...

Jims - 95960-52C Clutch Hub Puller fits '36-'90 Big Twin Models Features: Used to remove wet and dry clutch hubs without removing clutch release rod 4 bolts included for dry clutch removal Made in the U.S.A...

Belt Drives Ltd. - Extra Plate Clutch Kit fits '41-'E84 Big Twin Models Features: Four tempered steel drive plates also included Clutch plates are 20% wider than stock for improved clutch engagement and holding Both kit clutch plate stack height...

Belt Drives Ltd. - BDLPCP-0007 Replacement Clutch Kit for Rivera Primo Pro Clutch fits '90-'97 Evolution Big Twin Models Features: Complete replacement clutch plate kits for Primo Rivera belt drives listed Include all friction plates, drive plates...

Belt Drives Ltd. - BDLPCP-0005 Replacement Clutch Kit for Rivera Primo Pro Clutch fits 'L84-'89 Evolution Big Twin Models Features: Complete replacement clutch plate kits for Primo Rivera belt drives listed Include all friction plates, drive...

Belt Drives Ltd. - 1-5/8" Belt Drive fits '99-'06 FLT/​FLHT/​FLHR/​FLHX/​FLTR Models Features: 1-5/8" kits include front pulley, belt, clutch hub, clutch basket and aramid clutch set (consists of two half plates, four full plates and five steel drive...

V-Twin - Black Finned Derby Cover fits '84-'98 FXST, '85-'94 FXR, '86-'98 FLST Models Finned derby cover features a powder coated black finish. Order gasket and screws separately. Fitment: FL 1970-1984 FXST 1984-1998 FLT 1979-1998 FX...

WD Bearing - Transmission Cover Bearing fits '91-'99 FXD, '82-'94 FXR, '86-'99 FLST/FXST Models (OEM #8998) Quality bearing for a 5-speed transmission cover is a high quality hardened steel bearing for improved reliability. Fitment: FXD...

Colony - 8906-5 Transmission Shifter Cover Screw Allen fits '82-'86 FXR, '80-'86 FLT Models Transmission shifter cover screw, allen style Fitment: FXR 1982-1986 FLT 1980-1986

Drag Specialties - Clutch Shell fits '90-'93 Big Twin Models This top-notch clutch shell comes to you with center bearing and snap rings, all ready for an easy installation. Sold each. Replaces OEM#37707-90. Features Replacement clutch shell with...

V-Twin - Primary Gasket Kit fits '85-'94 FLT, '84-'93 FXR Models FXR/FLT Primary gasket kit is a three piece kit Fitment: FLT 1985-1994 FXR 1984-1993 Late 1984

Colony - 7/16"-14 x 1-1/2" Sprocket Pulley Mounting Hardware Kit with Washers fits '73-'98 FL, FX & XL Models (OEM #3769) Features: Brake rotor, sprocket and belt mounting kits Available to fit virtually all H-D brakes, chain and belt...

Colony - Acorn Front Belt Drive Pulley Nut fits '99-'06 Twin Cam Models Features: Chrome front pulley nut for open primary belt drive applications Made in the U.S.A. Fitment 2006 Harley-Davidson Softail Heritage EFI...

Drag Specialties - Drive Pulley Installation Kit fits '93-'06 Big Twin Models (Except '06 Dyna Glide (OEM #11165, 35211-91, 40251-92)) Features: Kit includes a main shaft pulley nut, lock plate, bolts and quad seal For 99-06 Twin Cam (except 06...

Drag Specialties - 1-1/2" Rear Drive Belt 132 Tooth fits '86-'92, '94 FLST/FXST '89-'93 FLT/​FXR Models (OEM #40023-86) Features: Carbon fiber reinforced Goodyear engineered Falcon SPC™ belts offer up to 33% more tensile strength than...

Drag Specialties - 1-1/2" Rear Drive Belt 136 Tooth fits '85-'96  Touring, '85-'94 FXR Models (OEM #40001-85) Features: Carbon fiber reinforced Goodyear engineered Falcon SPC™ belts offer up to 33% more tensile strength than conventional...

Barnett - Scorpion Pressure Plate fits '00-'06 Softail & '99-'06 Touring Models Using Hydraulic Clutch System (Repl. OEM #S 45380-02, 45992-03) This pressure plate has a strong billet aluminum design for use with Barnett Scorpion clutch PART...

DP - High-Performance Friction Clutch Plates fits '68-E'84 Big Twin Models (Repl. OEM #37930-68) The DP High-Performance Friction Clutch Plates have DP's exclusive high-heat friction materials for fade-free performance. Qty. Included:...

DP - High-Performance Steel Clutch Plates fits L'84-'89 Big Twin Models (Repl. OEM #37975-84A) The DP High-Performance Steel Clutch Kit Plates will not expand nor fade or promote clutch swell. Qty. Included: 7 Features Specifically designed to...

DP - High-Performance Steel Clutch Plates fits '68-E'84 Big Twin Models (Repl. OEM #37975-41(W/O Buffer)) The DP High-Performance Steel Clutch Plates will not expand nor fade or promote clutch swell. Qty. Included: 4 Features Specifically designed...

DP - High-Performance Friction Clutch Plates fits '90-'97 Evo Big Twin & '91-'22 Sportster Models (Repl. OEM #s 37911-90 & 37910-90) The DP High-Performance Friction Clutch Kit Plates have DP's exclusive high-heat friction materials for...

DP - High-Performance Steel Clutch Plates fits L'84-'97 Big Twin & '91-'22 Sportster Models (Exc. '21-'22 Sportster S/RH 1250S, '22 Nightster/RH975 Models) (Repl. OEM #s 37975-90, 379795-84A & 37913-90) The DP High-Performance Steel Clutch Kit...

Pro-One - Millennium Derby Cover fits '70-'98 Big Twin Models - Chrome  These billet aluminum covers are available in a ball-milled or smooth design. Features Sold as each Fitment 1998 Harley-Davidson Road Glide...

Pro-One - Millennium Derby Cover fits '99-'18 Big Twin Models (Exc. '18 FLSB & '15 FLHTCUL/​FLHTKL Models) These billet aluminum covers are available in smooth & black or chrome & bar-milled. NOTE: '06 Dyna Glide and all '17-'18...

Baker - DD6-Speed Gear Set fits '99-'00 Touring Models This is a 6-speed gear set (3.24:1 1st gear/.86:1 6th gear) with a 28-tooth motor sprocket, a longer primary chain, an adjusting shoe, a fixed spindle-shift drum and an anti-overshaft ratchet shift...

Baker - DD6-Speed Gear Set fits '90-'97 FXR & Touring Models This is a 6-speed gear set (3.24:1 1st gear/.86:1 6th gear) with a 28-tooth motor sprocket, a longer primary chain, an adjusting shoe, a fixed spindle-shift drum and an anti-overshaft...

Baker - DD6-Speed Gear Set fits '90-'97 Touring & FXR Models This is a 6-speed gear set (3.24:1 1st gear/.86:1 6th gear) with a 28-tooth motor sprocket, a longer primary chain, an adjusting shoe, a fixed spindle-shift drum and an anti-overshaft...

Drag Specialties - Clutch Shell fits '70-'E84 Big Twin Chain-Drive Models  Sold each. Replaces OEM#37702-70A. Features Replacement clutch shell with starter ring gear Fitment 1984 Harley-Davidson Electra Glide Special...

Drag Specialties - Pressure Plate Fits '41-'E84 Big Twin Models Sold each. Features Stamped steel construction Designed for use with five-stud clutch hubs Fitment 1984 Harley-Davidson Disc Glide FXRDG 1984 Harley-Davidson Softail Standard FXST ...

V-Twin - York FXR Rear Chain Drive Kit W/ 5 Spoke Sprocket fits '82-'99 FXR Models This Rear Chain Kit is designed for 5-speed models; the stock ratio is supplied with a 22-tooth front and 48-tooth rear steel sprockets with a 120-link chain. It features...

Drag Specialties - Diaphragm Clutch Spring Fits '90-'97 Big Twin Models Replaces OEM#37871-90 Features Standard-duty replacement spring Made in the U.S.A. Fitment 1997 Harley-Davidson Softail Heritage Springer...

Drag Specialties - High Performance Pressure Plate Fits '41-'E84 Big Twin Models Features Highly polished aluminum pressure plate will not warp or flex Allows smooth, positive clutch action Fitment 1984 Harley-Davidson Softail Standard FXST 1984...

Drag Specialties - Wet or Dry Friction Plate Set fits '68-'E84 Shovelhead Model Replaces OEM#37930-68 Features Runs wet or dry; meets or exceeds all OEM specs Contains (5) friction plates and (1) hub liner with...

DP - Heavy-Duty Clutch Kit fits '98-17 Evo Big Twin Models (Exc. Models W/ Slipper/Assist Clutch) This HD clutch kit comes in a foam-lined hard plastic case which protects the clutch components from damage prior to installation. This case can be used to...

Jims - 729 Inner Primary Seal/Bearing Removal/Installation Tool fits '85-'20 Big Twin Models Features: Gives a much better feel than a press while eliminating the possibility of applying too much pressure to the parts Provides precise installation...

Jims - 1710 Outer Race Snap Ring fits '69-'02 Big Twin Models Features: Used for removing and installing the Timken® bearing outer race snap ring A must for replacing rings in OEM and aftermarket cases Made in the U.S.A...