FXR Parts

Drag Specialties - Knurled Hotop Designs Footpegs: Features: Features die-cast construction Knurled black nylon insets for style and durability for all-day riding These unique male mount footpegs are only available from Drag Specialties NOTE:...

Joker Machine - Short Serrated Shifter Peg Fully CNC-machined from solid 6061 T-6 bar Superstrong, yet lightweight  construction Serrated shift pegs have serrations on the top surface only, and the bottom side is smooth to provide...

Wild 1 Physco Street Fighter 10" Handlebars Features: Handlebars are 25% thicker than stock Designed with fluid bends at precise angles for maximum comfort and control Pre-drilled for internal wiring Polished welds/ diamond...

Drag Specialties - Master Cylinder Update Kit fits '99-'05 Big Twin & '96-'03 Sportster Models (OEM #45005-05) Features: Kit includes decal, sight glass, screws and reservoir gasket Fitment 2005 Harley-Davidson Super Glide Custom...

Colony Machine - Crankcase Oil Screen & Spring Kit fits '70-'99 Big Twin & All Aftermarket Cases (OEM #24981-70, 24982-70) Features: Tappet screen and spring Made in the USA Fitment 1999 Harley-Davidson Softail Night Train...

Drag Specialties - 66-11/16" Black Vinyl High-Efficiency Clutch Cable fits '87-'06 Big Twin, '86-'13 Sportster Models (Except '06 Dyna Glide) W/ 32-15/16" Clutch Adjuster - Alternative Length Features: Cables feature chrome fittings, black vinyl...

Drag Specialties - Chrome Rear Sprocket fits 530 Chain '00-'21 Big Twin Models (Exc. Models W/ Cush Drive); 2.22" Center Diameter Choose from four different sprocket sizes: 46-tooth, 48-tooth, 49-tooth, 51-tooth...

Drag Specialties Handlebar Riser/Top Clamp Kits for 1" Diameter Clamping Area - 3" Rise Gloss Black Get the complete set up with the Drag Specialties Handlebar Riser/Top Clamp Kit. Features: Sold as a kit of two risers, one-piece top clamp and all...

Vance & Hines Header Wrap Kit - Black Manufacturer's Notice: Use of this Vance & Hines Header Wrap Kit may void all warranties of the exhaust system that this Kit is applied to. Header Wrap functions to insulate heat generated by exhaust gases...

V-Twin Z Style Handlebars - Chrome 1" Harley Davidson Chrome 1" Z Style Handlebar 4" Rise Chopper Bobber Custom Features:  Chrome 1" handlebar are Z style that feature early chopper styling with indents. Handlebars do not have knurls...

NAMZ Speedometer and Instrument Extension Harness 36" fits '12-'16 FLHR, '12-'16 Dyna, '11-'20 Softail (Exc. FXBB, FXBR, FXBRS) Allows for easy relocation of speedometer and indicator lights  Fitment 2020 Harley-Davidson Softail Low...

Biltwell - Tyson 1" Slotted Handlebars - 14" Height These Tyson 14" Slotted Handlebars from Biltwell feature a 12" end rise, a 30½" width, a 3½" center width and a 2¾" pullback. They are available in your choice of a chrome or black...

Biltwell - Tyson 1" Slotted Handlebars - 12" Height These Tyson 12" Slotted Handlebars from Biltwell feature a 12" end rise, a 30½" width, a 3½" center width and a 2¾" pullback. They are available in your choice of a chrome or black...

Drag Specialties - Inner Clutch Hub fits '90-'97 Big Twin Models Replacement OEM# 37550-90A Features Improved inner clutch hub with reinforced insert Accepts all OEM components Fitment 1997 Harley-Davidson Softail Heritage Springer...

Drag Specialties - Organic Front Brake Pads fits '84-'99 XL, FX, FL Models (Repl. OEM #44063-83A/C) Replacement OEM# 44063-83A/C Features Sintered metal Brake pads for OEM-Type replacement pads for all bikes from the late 1970s to the...

Arlen Ness - Fusion Male-Mount Air Trax Footpegs The Arlen Ness Footpegs will provide riders with traction, style, and comfort. Features: The perfect fusion of traction, style and comfort Footpegs are machined from billet aluminum and wrapped in...

Todd's Cycle Strip 1" Handlebars This is the "Stripper" handlebar found on many of Todd's Cycle's custom bikes Made from thick-wall steel Feature polished welds Slotted for internal wiring No knurling or electronic throttle control notch Made in...

Arlen Ness - Method Fork Braces fits '06-'17 FXD, '88-'94 FXR, '00-'18 XL Sportster Models The Arlen Ness Method Fork Braces are machined from tough aluminum, making them durable. These are designed to eliminate flex in your fork assembly. These are...

Todd's Cycle - Shooter Mirrors - Chrome or Black Todd's Cycle Shooter mirrors are CNC machined aluminum making them super durable. They are available in chrome or black and for the left or right side. These round mirrors are simple and wont take away...

HardDrive Master Cylinder Cover - fits '82-'95 HD Models Features: Chrome Fitment: 1995 - FXDS-Conv Dyna Convertible 1995 - FLHTCU Electra Glide Ultra Classic 1995 - FLSTC Heritage Softail Classic 1995 - FXSTC Softail Custom 1995 - XL883D...

V-Twin - Black Nose Cone Gear Cover fits '93-'99 Big Twin Models V-Twin's Nose Cone Gear Cover is designed to fit Big Twin Models. The bushings are installed and a seal is included. Fitment FXD 1993-1999FXST 1993-1999FXR 1993-1994FLST 1993-1999FLT...

Drag Specialties - Handlebar Damper Kit fits L'84-'94 FXR, L'84-'85 Sportster Models Repl. OEM #'s 56105-84, 56158-73 and 56159-73 Features Faithful reproduction of the late-style handlebar damper kits Includes two studs, two rubber damper sets and...

Drag Specialties Handlebar Riser/Top Clamp Kits for 1" Diameter Clamping Area -1-1/2" Rise Gloss Black Get the complete set up with the Drag Specialties Handlebar Riser/Top Clamp Kit. Features: Sold as a kit of two risers, one-piece top clamp and...

Drag Specialties - Clutch Shell fits '90-'93 Big Twin Models This top-notch clutch shell comes to you with center bearing and snap rings, all ready for an easy installation. Sold each. Replaces OEM#37707-90. Features Replacement clutch shell with...

Drag Specialties - Sintered Metal Front Brake Pads fits '84-'99 XL, FX, FL Models (Repl. OEM #44063-83A/C) Replacement OEM# 44063-83A/C Features Sintered metal brake pads are the OEM-type replacement pads for most bikes from the late 1970's to the...

Joker Machine Knurled Dual Cable Harley Grips - fits 1" Bars All CNC-machined 6061-T6 aluminum construction with precise-cut knurled finish diamond pattern along the grip for a comfortable feel and function Grips have a polished and chromed flat-head...

Drag Specialties Chrome Front Fork Brace for Dyna, FXR, Sportster Increases the torsional rigidity of your front fork Provides a great looking accessory that also improves handling CNC-machined from solid billet aluminum, then high-luster polished...

EMGO Bolt On Lil' Cruiser Mirrors The EMGO Die-Cast Mirrors are designed to have a Harley Davidson style. Theses are constructed from tough aluminum so you know they'll last. Available in bolt on style, making it an easy application process! You'll love...

Russ Wernimont Designs Retro Front Fenders Fits FXD, FXR, and XL Models Russ Wernimont Designs front fenders are an easy way to give your Harley a retro look. Made from durable, heavy steel, with a raw finish, these fenders are not only rad looking but...

Headwinds Chrome Headlight Mounting Post fits custom post w/ 7/8" vertical offset  Features Precision-machined T-6 billet aluminum with a chrome finish Blocks are machined 3/4" wide to fit most headlights and spotlights Made in the U.S.A.

Joker Machine - Ribbed Shift Pegs Fully CNC-machined from solid 6061 T-6 bar Superstrong, yet lightweight  construction Serrated shift pegs have serrations on the top surface only, and the bottom side is smooth to provide non-shoe-damaging...

Biltwell - Thunder Risers 2" - Raw Polished Features: Investment-cast stainless steel construction Fit bars with 1" diameter in clamping area 4 3/8" wide with 2" rise 3 1/2" on-center mounting holes accept 1/2" x 13 mounting hardware Include...

V-Twin - Black Harley Choke Cable Assembly (OEM #29229-88D) Choke cable assembly includes knob, casing, and inner wire featuring a black finish. Fitment: XL 1988-UP FLT 1993-2006 FLST 1993-2006 FXR 1993-1994 FXD 1991-2006 FXST 1993-2006

V-Twin - Evolution Intake Manifold Conversion Kit (OEM #27019-83) Evolution intake manifold conversion kit converts stock rubber compliance fittings to a more rigid mount system. Includes flange set and seals. Kit features a natural finish. Kit includes...

Colony - 1-1/4" Sprocket/Belt Pulley Mounting Hardware Kit with Nuts fits '73-'92 FL, FX & XL Models (OEM #41197-73) Features: Brake rotor, sprocket and belt mounting kits Available to fit virtually all H-D brakes, chain and belt...

Joker Machine - Billet Derby Cover fits '70-'98 Big Twin Models - Chrome  This Derby Cover is available in your choice of a finned or smooth design. Features Include mounting hardware Made in the U.S.A...

Drag Specialties - Air Cleaner Support Bracket W/ Crankcase Breather fits '93-'17 Big Twin Models (No Hose or Filter) (Exc. '08-'17 Dressers, '16-'17 Softails & '17 FXDLS Models) Features Kit allows the installation of aftermarket air cleaner...

Hofmann Designs - H/D Billet Shift Peg Black Features: CNC machined from T6061 Billet Aluminum Fits all factory shift arms Lightweight with a sleek custom appeal Proudly Made in the USA    

LA Choppers Kage Fighter 1-1/4" One Piece Handlebars These one piece handlebars from LA Choppers are designed for internal wiring, knotched for throttle by wire Harley Davidson Models, and made right here in USA. High-strength steel tubing...

Biltwell - Tracker Handlebars 1" O/S (1-1/8" Clamping Area) These Tracker Bars from Biltwell taper from 1" at the controls to 1-1/8" at the clamping area to give you that MX style on your Harely Davidson. They are available in your choice of a chrome or...