FXR Parts

Jims - 1705 Exhaust Drill Plate fits '84-'17 Big Twin (Except M-Eight), '86-'22 Sportster & '94-'09 Buell Models (Except 1125R) Features: Will position the seal evenly into the exhaust port of head Tool can be used with exhaust flange nuts Made...

Jims - 1710 Outer Race Snap Ring fits '69-'02 Big Twin Models Features: Used for removing and installing the Timken® bearing outer race snap ring A must for replacing rings in OEM and aftermarket cases Made in the U.S.A...

Jims - 1709 Sprocket Shaft Bearing Tool fits '77-'02 Big Twin Models Features: Tool is used to remove the sprocket shaft Timken® bearing on late '86-'02 Big Twins with an integral sprocket shaft Does the job better than anything else on the...

Jims - 2283 Transmission Door Puller fits '80-'06 Big Twin 5-Speed Models Features: Removes transmission door with gears and shaft attached Made in the USA Puller will not damage door bearings. Fitment 2006 Harley-Davidson Street...

Jims - 94547-80A Sprocket Shaft Bearing Race Tool fits '69-'02 Big Twin Models Features: Must use with JIMS® Race and Bearing Install Handle (PART# DS-196042) Used to remove and install Timken® bearing race on motor cases Made in the U.S.A...

Jims - 35316-80 5-Speed Main Drive Gear Tool fits '80-'06 Big Twin (Except '06 Dyna) & '91-'06 Sportster Models Features: Installs the main drive gear without removing the transmission Used to remove and install the main drive gear Made in the...

Jims - 34643-84 Valve Seal Installer for all Evolution Valve Guide Seals (OEM #34643-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...

Jims - 1012-70TB Cam Bushing Installer fits '70-'99 Big Twin Models (Except Twin Cam (OEM #25581-70)) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking...

Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...

Jims - 1047-TP Crank Assembly Removal Tool fits '55-'06 Big Twin Models (Except '06 Dyna) Features: This tool can only be used for removing the flywheel from the left case Will also press cases apart and break sealant bond Some case pressing will...

Jims - 1013-54TB Pin Bushing Installer fits '54-'92 Big Twin Models (OEM #25582-54/73) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking dowel pin Made...

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...

Drag Specialties - 3-1/4" Chrome Magnetic Ring Oil Filter With Nut fits '86-'22 Sportster (Except RH Sportster), 09-12 XR1200/X Models (OEM #63806-83, 63796-77A) Features: High-quality chrome spin-on-style oil filters Magnetic filters are designed...

Drag Specialties - Paper Oil Filter with Spring fits '65-'82 FX/FL, '57-'78 Sportster Models (OEM #63835-87T, 63837-92T, 6383940-53) Features: High-quality drop-in oil filter Fitment 1982 Harley-Davidson Super Glide II...

S&S Cycle - Valve Spring Kit fits '48-'84 Big Twin Models Features: To be used with cams with up to .550" lift Includes springs and aluminum top retainers 140-lb. seat pressure Must allow additional rocker clearance for 48-65 Panheads Made in...

Colony - 8703-2 Relief Valve Plug Kit fits '81-'84 Big Twin Models (OEM #26263-80) Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

V-Twin - Oil Pump Pressure Valve Stainless Steel fits '82-'91 FXR, '86-'91 FLST, '84-'91 FXST Models Machined stainless steel oil pump pressure valve for Big Twins. Fits oil pressure relief valve port on oil pumps. Used as an oil pressure indicator...

V-Twin - Transmission Motor Support fits '82-'94 FXR Model Zinc plated transmission motor support features laser cut 1/4" steel with all holes in place. Includes the tab for front exhaust mounts. Acts to absorb torque between the drive train...

Drag Specialties - 40 Spoke Chrome Laced Wheel 21” x 2,15.” fits '99 FXD, '86-'99 XL (Single or Dual Disc (OEM #43557-87)) Features: Valve Stem: CMV (Center Metal Valve) Uses OEM mounting hardware; designed to use OEM style rotors,...

Drag Specialties - 40 Spoke Chrome Laced Wheel 19” x 2.5” fits '86-'99 Sportster (OEM #43312-84) Features: Valve Stem: CMV (Center Metal Valve) Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and sprockets Fully...

Drag Specialties - 40 Spoke Chrome Laced Wheel 19" x 2.5" fits '78-'83 FXR/FX, '78-'83 XL (Dual Disc (OEM #43341-78)) Features: Valve Stem: CMV (Center Metal Valve) Uses OEM mounting hardware; designed to use OEM style rotors, pulleys and...

Drag Specialties - Socket-Head Master Cylinder/Cover-Lever Mount Bolt Kit fits '86-'03 Sportster, '99-'17 Twin Cam Models (Except '08-'14 Dressers)

Drag Specialties - Chrome Socket-Head Master Cylinder Screws fits '99-'17 Big Twin, '96-'13 Sportster Models (Except '15-'17 Softails, '08-'17 Dressers, H-D FL Trike (OEM #45044-96, 42808-04)) Features: Socket-head screws for a number of...

Colony - Head Bolt Set fits '86-'91 Sportster Models (OEM #16478-85A, 16480-85A) Features: 12-point replacement headbolts Made in the U.S.A. Fitment 1992 Harley-Davidson Dyna Daytona FXDB - - 1991 Harley-Davidson Dyna Sturgis...

Drag Specialties - Oil Pressure Gauge Mount fits 80” Evolution Engines (Except FLT/HT/HS/HR/​Ultra) Features: Chrome mount attaches at the crankcase and rocker box mounting bolt, allowing an unobstructed view of your oil pressure Stock oil...

Drag Specialties - Chrome Oil Tank fits Most Aftermarket FXR Frames (OEM #62406-81) Features: Formed steel construction with a chrome finish Bolt-in application; uses OEM mounts Fittings, clamps and hoses included Approximately 3.0 quart...

V-Twin - Chrome 48" Handlebar Switch Kit fits Big Twin Models Handlebar switch kit includes complete right and left switch assemblies, brake light switch, mounting screws, and clips. Switch kit measures 48" long and has a chrome finish. Fitment: FXR...

V-Twin - Black Front 1 Piston Caliper Set fits FXR & XL Models (OEM #44195-80) Features: Caliper set includes body, 1 piston, seals right and left, brake pads and inner and outer plates flat black finish Order mounting hardware separately Sold...

V-Twin - Mid Control Kit fits '83-'86 FXR Models - Chrome Features: FXR mid control kit features chrome mounts, chrome brake pedal and footpeg supports. factory style components for installation. Order brake line, reservoir feed line and additional...

Colony - 8707-6 Oil Pump Plug Kit fits '81-'84 Big Twin Models Features: Plug and plug kits designed for a variety of Harley-Davidson® oil systems Complete with washers (or O-rings if required) Made in the U.S.A...

V-Twin - 1" NYC Handlebars W/O Indents These handlebars have a narrow profile for city streets and its threaded mounts are 1/2" x 13" thread. Available in your choice of a black or chrome finish. Fitment Custom Application

Drag Specialties - 37" Black Vinyl Throttle Cable fits '96-'17 Big Twin, '07-'22 XL Models (Except '99-'01 EFI Dressers, '21-'22 XL S/RH 1250S, '22 Nightster/RH975) - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl...

Drag Specialties - 42-1/2" Black Vinyl Throttle Cable fits '96-'17 Big Twin, '07-'22 XL Models (Except '99-'01 EFI Dressers, '21-'22 XL S/RH 1250S, '22 Nightster/RH975) - Alternative Length Features: Cables feature polished-chrome fittings, black...

Drag Specialties - 45-1/2" Black Vinyl Throttle Cable fits '96-'17 Big Twin, '07-'22 XL Models (Except '99-'01 EFI Dressers, '21-'22 XL S/RH 1250S, '22 Nightster/RH975) - Alternative Length Features: Cables feature polished-chrome fittings, black...

Drag Specialties - 47-1/2" Black Vinyl Throttle Cable fits '96-'17 Big Twin, '07-'22 XL Models (Except '99-'01 EFI Dressers, '21-'22 XL S/RH 1250S, '22 Nightster/RH975) - Alternative Length Features: Cables feature polished-chrome fittings, black...

Drag Specialties - 48-1/2" Black Vinyl Throttle Cable fits '96-'17 Big Twin, '07-'22 XL Models (Except '99-'01 EFI Dressers, '21-'22 XL S/RH 1250S, '22 Nightster/RH975) - Alternative Length Features: Cables feature polished-chrome fittings, black...

Drag Specialties - 30" Black Vinyl Throttle Cable fits '88-'95 XL Sportster & '90-'95 Big Twin Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an inner...

Drag Specialties - 44" Black Vinyl Throttle Cable fits '88-'95 XL Sportster & '90-'95 Big Twin Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an...

Drag Specialties - 45-1/2" Black Vinyl Throttle Cable fits '88-'95 XL Sportster & '90-'95 Big Twin Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an...

Drag Specialties - 36" Black Vinyl Throttle Cable fits '88-'95 XL Sportster & '90-'95 Big Twin Models - Alternative Length Features: Cables feature polished-chrome fittings, black vinyl outer casings, tempered-steel inner conduit and an...