Engine

Colony cylinder head bolt set with a chrome finish. Fits: FXST 1992-1998 XL 1993-2004 FLST 1992-1998 FXD 1992-1998 FLT 1992-1998 UOM: 8 - SET

Arlen Ness - 10-Gauge Points Cover fits '17-'22 M8 Softail Models These covers are machined from 6061-T6 billet aluminum and are available in seven different colors: Chrome, Black Anodized, Blue Anodized, Gold Anodized, Orange Anodized, Red Anodized and...

S&S Cycle - 475 Cam Chain Drive Camchest Kit W/ Chrome Pushrod Tubes fits '17-'20 Oil-Cooled M8 Models Features All parts in each kit are matched to ensure superior quality, fit, finish and performance Oil pump and cam plate are...

V-Twin - Pushrod Cover Kit fits '66-'84 Harley Shovelhead This pushrod cover kit is titanium-plated and features the inner pushrod set, the lower pushrod cover set, a cover spring, a cover spring cup, a cover washer, a gasket and a clip...

Drag Specialties - Spherical Radius Points Cover fits '17-'21 M8 Softail Models Available in your choice of a chrome, flat black or wrinkle black finish. Features Beautiful radiused points cover matches our brake caliper inserts and fork tube cap...

Revolution Performance - Tap-It-Right Tappet Cover Kits fits '17-'23 M8 Softail Models With Revolution Performance's Tap-It-Right Tappet Cover Kits, you won't have to worry about the inside bolt on the anti-rotation device breaking off in the case. The...

Feuling - 525 HP+® Chain Drive Conversion Camchest Kits for '99-'06 Twin Cam (Except '06 Dyna Glide) NOTE: Conversion camshafts for '99-'06 Twin Cam engines use the '99-'06 inner cam journals with the '07-'16 outer cam journals permitting the use of...

Drag Specialties - Spherical Radius Points Cover fits '70-'99 Big Twin (Exc. Twin Cam) and '71-'21 Sportster Models (Exc. '21 Sportster S/RH1250S Models) Available in your choice of a chrome, flat black or wrinkle black finish. Features Beautiful...

Cometic - Breather Assembly Gasket Kit fits '03-'17 Twin Cam Models (Sold Each) This kit comes with all necessary gaskets/seals for a full breather rebuild assembly. Please Note: Breather assembly rebuild kit includes two metal breather plates, two...

Drag Specialties - Cam Cover fits '93-'99 Evolution Big Twin Models The bushings on this cam cover are installed, pinned and reamed to OEM specifications. Available in your choice of a satin black or chrome finish. Features Die-cast aluminum...

Drag Specialties - Gloss Black Tappet Block Cover fits '17 & Up Harley M8 Models Repl. OEM #25700890 Features Made from die-cast aluminum Includes gaskets and screws Fitment 2020 Harley-Davidson Softail Low Rider S...

Drag Specialties - Spherical Radius Points Cover fits '99-'17 Twin Cam Models Available in your choice of a chrome, flat black or wrinkle black finish. Features Beautiful radiused points cover matches our brake caliper inserts and fork tube cap...

EMD - Rocker Covers - fits '17-Up M8  Dress up your M8 with a Rocker Cover by EMD. Features: Available in Classic Ribbed or Shovel design Available in Black or Raw finish Gaskets sold separately Fitment: 2019 - FXDR Softail Power...

V-Twin - 107" Big Bore Twin Cam Cylinder Kit fits '99-'06 FLST/FXST/FLT/FXD Model 107" Twin Cam big bore cylinder kit includes 10.5:1 piston kit and steel cylinders with black finish. Requires case machining and fits a 4" stroke flywheel...

Drag Specialties - Cam Cover fits '73-'92 Big Twin Models The bushings on this cam cover are installed, pinned and reamed to OEM specifications. Available in your choice of a satin black or chrome finish. Features Die-cast aluminum...

Drag Specialties - High-Performance Oil Pump fits '17-Up M8 Twin-Cooled Motors The High-Performance Oil Pump features high-quality die-cast aluminum body construction, and high-strength steel gear construction. Features Helps to reduce oil...

Drag Specialties - Front Brake Master Cylinder Cover (OEM #41700237, 41700338) Features: Includes rubber cover gasket Fitment: 2022-2023 Harley-Davidson Softail Low Rider ST FXLRST - - 2020-2023 Harley-Davidson Softail Low...

EMD - Ribbed Cam Cover - fits '17-Up M8  These Ribbed EMD covers are the real alternative to the cold, rigid and old fashioned “Billet” style. Features: Manufactured in die cast aluminum, CNC milled gasket surface OEM...

Jims - 1672 Crankshaft Bearing Tool fits '03-'17 Twin Cam “A” and “B” Motors Models Features: Designed to remove and replace the right crankcase bearing Press bearing in and out straight with no damage to the case Made in...

Jims - 956 Replacement Sleeve Timken Case Bearing Tool Features: Sleeve is several times stronger than stock aluminum case material that standard bearings ride in Replacement sleeve kit for Timken® Case Bearing Tool Made in the...

Jims - 938 7mm Valve Guide Installer fits '05-'17 Twin Cam, '04-'20 Sportster & '04-'09 Buell Models (Except 1125CR) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve...

Jims - 5808 Valve Spring Compression Collar Tool fits '17-'21 M-Eight Models Features: Valve spring collar allows existing compressor to remove smaller valves on M8 engines For use with JIMS® Valve Spring Compressor Tool (PART# DS-196013) Made...

Jims - 5833 Ball Bearing Installation Tool fits '17-'20 Softail & Touring Models Features: All Milwaukee-Eight® (M8) engines incorporate balancers to reduce vibration Designed to precisely install these bearings in the proper location for...

Jims - 5835 Valve Spring Compressor Tool fits '17-'21 M-Eight Models Features: Once the cylinder is filled with compressed air, the technician can easily rotate the tool and compress the top collar of the valve spring exposing the keepers to remove...

Jims - 2240 Head Holder Guide Tool '48-'04 Big Twin, '57-'03 Sportster & Some SE CVO Twin Cam Models (5/16” Valve Guides) Features: Adapters are supported by a stand that makes it easy to press valve guides in and out A special guide...

Jims - 1034 Sprocket Shaft Holder fits '55-'99 Big Twin & '99-'06 Twin Cam (Except '06 Dyna) Features: Used to hold flywheel assembly in vise, with or without left case attached Made in the U.S.A...

Jims - 2233 Tappet Oil Filter Plug Tool fits '70-'99 Big Twin Models Features: Removes oil screen without removing exhaust Used to remove the tappet oil screen plug Made in the U.S.A. Fitment 1999 Harley-Davidson Softail Night Train...

Jims - 1012-70TB Cam Bushing Installer fits '70-'99 Big Twin Models (Except Twin Cam (OEM #25581-70)) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking...

Jims - 34731-84 Valve Guide Installer fits all Evolution & '99-'04 Twin Cam Models (OEM #34731-84) Features: Available from JIMS to allow the proper removal or installation of shoulderless valve guides as well as valve seals Made in the U.S.A...

Jims - 1013-54TB Pin Bushing Installer fits '54-'92 Big Twin Models (OEM #25582-54/73) Features: Use to install bushing and drill dowel pin hole to factory specification #31 jobber length HSS drill bit included with jigs Use staking dowel pin Made...

Jims - 95760-TB Puller Camshaft Bearing fits '58-'99 Big Twin Models (Except Twin Cam) Features: Used to remove inner cam bearing without damaging the crankcase Tool is also designed to keep rollers from falling into the crankcase Comes with...

Jims - 95760-TP Pinion Bearing Puller fits '54-'99 Big Twin Models Features: Use to remove pinion bushing from cam cover in one easy operation Use with JIMS® Cam Cover Holder Made in the U.S.A. Fitment 2000 Harley-Davidson FXR...

Drag Specialties - 3-1/4" Chrome Magnetic Ring Oil Filter With Nut fits '86-'22 Sportster (Except RH Sportster), 09-12 XR1200/X Models (OEM #63806-83, 63796-77A) Features: High-quality chrome spin-on-style oil filters Magnetic filters are designed...

Drag Specialties - 2-1/4" Chrome Magnetic Ring Oil Filter With Nut fits 'L82-'86 FX/FL, '80-'E85 Sportster Models (OEM #63782-80A, 63810-80) Features: High-quality chrome spin-on-style oil filters Magnetic filters are designed with a magnetic ring...

Drag Specialties - 3-1/4" Chrome Magnetic Ring Oil Filter With Nut fits '17-'24 M-Eight, '99-'17 Twin Cam Models (OEM #63798-99, 63731-99A) Features: High-quality chrome spin-on-style oil filters Magnetic filters are designed with a magnetic ring in...

Drag Specialties - Oil Filter with Nut fits '17-'24 M-Eight (Standard Capacity), '99-'17 Twin Cam Models (OEM #63731-99A, 63798-99) Features: High-quality spin-on filters are a dependable replacement for most Harley-Davidson models Includes a 17 mm...

Drag Specialties - Oil Filter fits '17-'24 M-Eight Model (High Capacity) (OEM #627002-96, 627002-97) Features: High-quality spin-on filters are a dependable replacement Fitment 2024 Harley-Davidson Road King Police...

Drag Specialties - Oil Filter with Nut fits '17-'24 M-Eight Model (High Capacity) (OEM #627002-96, 627002-97) Features: High-quality spin-on filters are a dependable replacement Note: Features a 17 mm hex nut on the end of the filter for easy...

Drag Specialties - Oil Filter Wrench fits '01-'21 Big Twin Models Features: 14-flute cutout design to clear crank sensor Fits Drag Specialties and most other oil filters with 14 flutes Fitment 2018 Harley-Davidson Softail Breakout...

Drag Specialties - Oil Filter fits '17-'24 M-Eight (Standard Capacity), '99-'17 Twin Cam Models (OEM #63731-99A, 63798-99) Features: High-quality spin-on filters are a dependable replacement Fitment 2024 Harley-Davidson Road King Police...